Renia Top-Fit Contact Adhesive: 200 ml

Product code: Renia 130 221
In Stock 150 pcs

With Renia Top-Fit contact adhesive, you get a strong bond right now. Press the parts firmly together after joining and you can keep working on them straight away. The technical data sheet gives the required pressure and pressing time. You can quickly and reliably bond leather components, wallets, or complex bag parts.

  • Instant strength without waiting: Parts hold as soon as they are pressed together, so you can trim them and keep working on them right away. The strength of the bond then keeps growing during the first day.
  • Time to join: The open time of the adhesive depends on the materials being joined. Exact values and the recommended procedure are in the manufacturer's technical data sheet.
  • For leather: Suitable for wallets, handbags, belts, and shoes.

When is it most useful?

  • Work with leather, rubber, EVA foam, cork, or felt.
  • Belt straps, wallets, or complex bag parts – quick and reliable bonding.

When is it not suitable?

  • Plasticized PVC (vinyl); for that, use Colle de Cologne.
  • Some types of thermoplastic rubber (TR) used for soles; these need Renia Rehagol pre-treatment and Colle de Cologne adhesive. We do not stock Rehagol.
  • Polyurethane (PUR) without Renia Primer for PUR, which we do not stock.
  • Unventilated areas.

Renia Top-Fit is a toluene-free contact adhesive based on polychloroprene (neoprene). Apply it with the brush #42515-000 or the Reusable Glue Spreaders #3431-00. Porous leather sometimes needs two coats. Both the 1 l and the 200 ml packs come with a brush in the lid.

To check which glue suits your pair of materials, use the Which glue for which material tool.

Product code Renia 130 221
Weight 237 g

Documents to download

Workshop opinion

Pavla NovákováI put it on the workbench first. You get facts instead of guesses.

I use Renia Top Fit when parts are damp or slippery. It copes even with slightly damp leather, so it suits saddlery work and moulding, where parts are often damp. The bond holds almost instantly, so you can keep working without waiting.

It is solvent-based, so it has a chemical smell. I do not use it every day and it is not the cheapest. I take the smell as part of a solvent-based adhesive.

Product variants and parameters
Volume
200 ml
1000 ml

Enter a quantity to see the total price incl. 21% VAT

Total for 1 pc 16 €

Added!

Keep from freezing Flammable
About us Hardware, leather and tools under one roof. For collars, leashes, halters, belts and handbags.

Why buy from Pet Hardware®

We'll let you know when it's back

Enter your email and we'll send you one notification when this product is back in stock. Nothing more.

Frequently asked questions

No. The word “Stand” followed by a date (for example “Stand 08/2021”) is neither an expiry date nor a production date. It marks the label version, i.e. the date on which the manufacturer Renia approved its design and legal wording.

Renia uses it to keep up with ongoing changes to EU legislation on chemical products, such as the CLP Regulation. The date shows which requirements the label was created under. It has nothing to do with when the tin was filled or how old its contents are.

The manufacturer Renia guarantees the technical properties of its products for 12 months from production. Renia usually produces fresh to order, so in practice you can count the 12 months roughly from delivery.

When stored properly, the products remain usable much longer. According to the manufacturer, the properties of most of them usually do not change for another 2–3 years.

The manufacturer is not required to state a production date or a best-before date on these chemical products.

Treat a glued joint on a collar or leash as a supporting one. Without additional hardeners, the manufacturer does not declare water resistance for our Renia glues.

  • Bending: the manufacturer explicitly states that the dried film stays very flexible only for Aquilim 315.

  • Water: according to the manufacturer, Aquilim 315 is significantly more resistant with Renia A300 hardener, but we do not sell it. The technical data sheet for Top-Fit and Colle de Cologne does not state water resistance.

  • Loctite 401 instant glue retained 75 % of its original strength after 1,000 hours in water in the manufacturer's test.

For stressed spots that get wet, add stitching or rivets to the glue.

Thin the Top-Fit and Colle de Cologne contact cements with Renia thinner, not with acetone. Thin Aquilim 315 with a small amount of water.

  • Cleaning tools: clean the brush and the container with Renia thinner or acetone after using contact cement, and with water after using Aquilim 315.

  • The thinner does not change the open time of the glue. If you mix it in thoroughly, the glue will not separate afterwards.

According to the manufacturer, Renia glues last at least 12 months at 20 °C. You will find more about storage in the answer How long does Renia glue or dye last?

Top-Fit is the fastest, Colle de Cologne the most universal, and Aquilim 315 is solvent-free.

  • Top-Fit: contact cement with very high initial tack, so you work on the piece right after joining. It bonds leather, rubber, EVA, felt and cork. It does not bond plasticised PVC.

  • Colle de Cologne: universal contact cement; you can handle the piece after a few minutes. It also bonds fabric, metal and plasticised PVC (vinyl).

  • Aquilim 315: water-based and solvent-free. The dried film stays very flexible and transparent. It dries in 30 to 60 minutes and reaches maximum strength after 2 days.

All three bond leather to leather. The choice depends on what you are bonding to the leather and whether you want to work without solvents.

Contact cement contains solvents and you coat both parts with it. Water-based glue is solvent-free, but it dries more slowly.

  • Contact cement (Top-Fit, Colle de Cologne): solvent-based and highly flammable. Thin and clean it with Renia thinner.

  • Water-based (Aquilim 315): solvent-free, and the manufacturer does not classify it as hazardous. It dries in 30 to 60 minutes, and once it turns clear it is dry. Wash your tools with water. It must not freeze.

When you glue absorbent leather to a dense material, coat only the dense side with Aquilim 315 and join the parts within a few minutes. You will find the explanation and the procedure in the Aquilim 315 technical data sheet.

Roughen both parts, coat them and join them within the glue's open time, then press them firmly together.

  1. Roughen both surfaces. Sand the leather or clean it.

  2. Coat both parts until you can see a layer of glue on them. Absorbent leather sometimes needs two coats.

  3. Join the parts within the open time. According to the manufacturer it depends on the material; you will find the exact values in the technical data sheets for Top-Fit and Colle de Cologne.

  4. Press. The manufacturer specifies a pressure of 1 to 5 bar: at least 60 seconds at 1 bar, at least 15 seconds at 3 bar. Do not deform soft materials while pressing, or you will break the glue film.

The bond keeps gaining strength: for the first day with Top-Fit, for the first two days with Colle de Cologne.

For leather to leather, use Renia Top-Fit. It grips straight after joining, so you can carry on working on the piece right away.

  • Leather with waterproof PVC-coated webbing: Renia Colle de Cologne. According to the manufacturer, Top-Fit does not bond plasticised PVC.

  • Solvent-free: Renia Aquilim 315, water-based. It dries more slowly, in 30 to 60 minutes.

  • Small metal part on leather: Loctite 401 instant glue.

For any other pair of materials, the tool Which glue for which material will pick the glue for you.

Often bought together