Renia Colle de Cologne Universal Adhesive: 200 ml

Product code: Renia 110 221
In Stock 101 pcs

When it comes to leather goods or footwear, you need a bond that can handle daily wear and tear. That’s exactly where Renia Colle de Cologne neoprene-based contact adhesive comes in – it also bonds plasticized PVC (vinyl).

  • With pre-treatment, for soles too: For thermoplastic rubber (TR), the manufacturer prescribes treatment with Renia Rehagol, for foamed polyurethane (PUR) with Renia Primer for PUR. We do not stock either product.
  • Time to join: The open time of the adhesive depends on the materials being joined. Exact values and the recommended procedure are in the manufacturer's technical data sheet.
  • Strength keeps growing: The strength of the bond keeps growing for the first two days. According to the manufacturer, adding 5–10% of Renia Hardener C hardener significantly increases resistance to heat, oil and chemicals. We do not stock it.

Shelf life of at least 12 months at 20 °C. Always work in well-ventilated areas – the adhesive contains organic solvents and is highly flammable.

When is it most useful?

  • Leather goods where strength matters (bags, belts, wallets, backpacks).
  • Shoemaking and repairs – soles, insoles, uppers.
  • Bonding PVC, metal, textile, thermoplastic rubber (TR) and foamed PUR (TR and PUR with pre-treatment). PVC to PVC and natural rubber only with Renia Hardener C hardener.
  • Versatile manufacturing where reliable bonds are a must.

When is it better to use something else?

  • Slick plastics such as PE and PP without pre-treatment; the manufacturer prescribes briefly flame-treating them with an open gas burner flame before application.
  • Poorly ventilated areas.

We recommend applying with the brush #42515-000 or the Reusable Glue Spreaders #3431-00. But whether you go for the 1 l or the 200 ml pack, a handy brush is already waiting in the lid.

To check which glue suits your pair of materials, use the Which glue for which material tool.

Product code Renia 110 221
Weight 237 g

Documents to download

Workshop opinion

Pavla NovákováI put it on the workbench first. You get facts instead of guesses.

Renia Colle de Cologne is a contact adhesive I have known for years. At times it smells so strongly that I have to open all the windows, but the bond does not budge, even with leather glued to plasticised PVC. For thermoplastic rubber and polyurethane foam the maker specifies pre-treatment, and it will not bond polyethylene or polypropylene without flame treatment. In batch production or when gluing several layers at once, I like that it becomes tacky quickly.

There are cheaper adhesives on the market. It contains organic solvents and is flammable, so I always have to ventilate. The bond keeps gaining strength for the first two days. I do not have to fix rejects caused by a bond coming loose with it.

Product variants and parameters
Volume
200 ml
1000 ml

Enter a quantity to see the total price incl. 21% VAT

Total for 1 pc 17.39 €

Added!

Keep from freezing Flammable
About us Hardware, leather and tools under one roof. For collars, leashes, halters, belts and handbags.

Why buy from Pet Hardware®

We'll let you know when it's back

Enter your email and we'll send you one notification when this product is back in stock. Nothing more.

Frequently asked questions

No. The word “Stand” followed by a date (for example “Stand 08/2021”) is neither an expiry date nor a production date. It marks the label version, i.e. the date on which the manufacturer Renia approved its design and legal wording.

Renia uses it to keep up with ongoing changes to EU legislation on chemical products, such as the CLP Regulation. The date shows which requirements the label was created under. It has nothing to do with when the tin was filled or how old its contents are.

The manufacturer Renia guarantees the technical properties of its products for 12 months from production. Renia usually produces fresh to order, so in practice you can count the 12 months roughly from delivery.

When stored properly, the products remain usable much longer. According to the manufacturer, the properties of most of them usually do not change for another 2–3 years.

The manufacturer is not required to state a production date or a best-before date on these chemical products.

Treat a glued joint on a collar or leash as a supporting one. Without additional hardeners, the manufacturer does not declare water resistance for our Renia glues.

  • Bending: the manufacturer explicitly states that the dried film stays very flexible only for Aquilim 315.

  • Water: according to the manufacturer, Aquilim 315 is significantly more resistant with Renia A300 hardener, but we do not sell it. The technical data sheet for Top-Fit and Colle de Cologne does not state water resistance.

  • Loctite 401 instant glue retained 75 % of its original strength after 1,000 hours in water in the manufacturer's test.

For stressed spots that get wet, add stitching or rivets to the glue.

Thin the Top-Fit and Colle de Cologne contact cements with Renia thinner, not with acetone. Thin Aquilim 315 with a small amount of water.

  • Cleaning tools: clean the brush and the container with Renia thinner or acetone after using contact cement, and with water after using Aquilim 315.

  • The thinner does not change the open time of the glue. If you mix it in thoroughly, the glue will not separate afterwards.

According to the manufacturer, Renia glues last at least 12 months at 20 °C. You will find more about storage in the answer How long does Renia glue or dye last?

Top-Fit is the fastest, Colle de Cologne the most universal, and Aquilim 315 is solvent-free.

  • Top-Fit: contact cement with very high initial tack, so you work on the piece right after joining. It bonds leather, rubber, EVA, felt and cork. It does not bond plasticised PVC.

  • Colle de Cologne: universal contact cement; you can handle the piece after a few minutes. It also bonds fabric, metal and plasticised PVC (vinyl).

  • Aquilim 315: water-based and solvent-free. The dried film stays very flexible and transparent. It dries in 30 to 60 minutes and reaches maximum strength after 2 days.

All three bond leather to leather. The choice depends on what you are bonding to the leather and whether you want to work without solvents.

Renia Colle de Cologne bonds leather to waterproof PVC-coated webbing and to metal. The manufacturer lists it as the only one of our Renia glues for fabric, metal and plasticised PVC.

  • Metal (tag, ring, rivet): for small metal parts we recommend Loctite 401 instant glue, which the manufacturer lists for metals and for leather.

  • Do not use Top-Fit on PVC-coated webbing, as according to the manufacturer it does not bond plasticised PVC.

  • Polypropylene webbing holds with contact cement only if you first briefly pass the surface through the flame of a gas torch.

According to the technical data sheets, we have no verified bond for TPU coating or for nylon. Secure such a joint with rivets or stitching. You will find more material pairs in the tool Which glue for which material.

Contact cement contains solvents and you coat both parts with it. Water-based glue is solvent-free, but it dries more slowly.

  • Contact cement (Top-Fit, Colle de Cologne): solvent-based and highly flammable. Thin and clean it with Renia thinner.

  • Water-based (Aquilim 315): solvent-free, and the manufacturer does not classify it as hazardous. It dries in 30 to 60 minutes, and once it turns clear it is dry. Wash your tools with water. It must not freeze.

When you glue absorbent leather to a dense material, coat only the dense side with Aquilim 315 and join the parts within a few minutes. You will find the explanation and the procedure in the Aquilim 315 technical data sheet.

Roughen both parts, coat them and join them within the glue's open time, then press them firmly together.

  1. Roughen both surfaces. Sand the leather or clean it.

  2. Coat both parts until you can see a layer of glue on them. Absorbent leather sometimes needs two coats.

  3. Join the parts within the open time. According to the manufacturer it depends on the material; you will find the exact values in the technical data sheets for Top-Fit and Colle de Cologne.

  4. Press. The manufacturer specifies a pressure of 1 to 5 bar: at least 60 seconds at 1 bar, at least 15 seconds at 3 bar. Do not deform soft materials while pressing, or you will break the glue film.

The bond keeps gaining strength: for the first day with Top-Fit, for the first two days with Colle de Cologne.

Often bought together