Double Cap Rivets

Detailed filter
Brass Brass (anti-oxidation) Stainless Steel
6–7 mm 8 mm 10 mm 11 mm 13 mm
6 mm 7 mm 8 mm 10 mm 12 mm
Not sure about your choice? Our advisor will help. For each parameter we explain what it means and how to choose the right one. Help me choose

Prices include 21% VAT. More about VAT and customs fees.

Guides & articles

Riveting guide

Quick selection

Jump straight to what you need.

Material

Brass Brass (anti-oxidation) Stainless Steel

Shank length

6–7 mm 8 mm 10 mm 11 mm 13 mm

Head diameter

6 mm 7 mm 8 mm 10 mm 12 mm

Prefer to choose for yourself? Set up the filter exactly to your needs.

Detailed filter

Parameter guide

What the parameters mean and how to choose the right values.

The shank length determines how thick a material can be riveted. For proper setting, choose a shank 2–3 mm longer than the total material thickness – the joint will be strong, even, and free from head deformation.

The shank diameter defines the thickness of the rivet part that passes through the material. Choose it so that the hole in the leather or webbing is slightly smaller than the shank diameter, so the rivet sits tight after riveting.

Head diameter defines the size of the visible part of the saddler’s rivet and affects both appearance and load capacity along the edge. For soft or perforated materials and tensioned areas, a larger head provides better pressure distribution.

How many double cap rivets come in one pack. Most finishes are sold in packs of 1000, some in packs of 10, so compare prices per rivet rather than per pack.

Frequently asked questions

The most common questions – materials, selection and practical tips.

The total thickness of the layers you're joining decides. Add the shank overhang needed for spreading: the shank should be 2–3 mm longer than the material thickness.

The shank length is listed for every rivet in the dimensions table as dimension B — the full range is in the Rivets & Screws category.

The hole diameter differs by material. For leather, choose a punch slightly smaller than the shank diameter — leather is elastic and grips the shank tightly. For waterproof webbing, choose a punch that matches the shank exactly; the webbing doesn't stretch, so the shank has to pass through without being forced.

A shank that's too long shows up as a rivet that deforms while spreading, or caps that don't line up.

Why Pet Hardware®

  • About us 37 years supplying hardware to makers and workshops, 102,302 customers so far.
  • About us Hardware, leather and tools under one roof. For collars, leashes, halters, belts and handbags.
  • Why choose us Buy more, pay less. You see pack and carton prices and any order-value discount before paying.

Filtering products

Close
View products