The collar is stitched, the edges are burnished and all it needs now is a color that stands out. Angelus neon acrylic paints are brighter than the standard shades, but semi-translucent. They only reach full brightness on a white base, so first apply Angelus white acrylic paint
#ANG/720-01-005. The white base hides the grain of the leather. If you want the grain to show through, reach for an alcohol-based dye instead.
Degreasing is the boring part everyone wants to skip. Don't skip it. Paint only sticks to a clean surface, so first clean the leather with Angelus Deglazer
#ANG/820-01-000. Then apply the white base and, on top of it, two to four thin coats of neon paint. Let each coat dry for about twenty minutes.
Once the paint is dry, Angelus Finisher adds a protective layer, which is especially useful where the piece takes the most stress. Choose it by how the piece should look: Normal
#ANG/600-01-000 for everyday protection, Matte
#ANG/620-01-000 for a matte surface, Satin
#ANG/605-01-000 for a satin one and High Gloss
#ANG/610-01-000 for a high gloss.
How the paint behaves on leather
- Bends with the piece: The dried paint forms a flexible film. Applied in thin coats, it doesn't crack even at the bend by the buckle.
- Once dry, water won't wash it off: So the collar can take the rain. Until the paint dries, you can clean brushes and hands with soap and water.
- Apply it with a brush or an airbrush: A soft acrylic brush leaves no streaks.
- Patent leather needs more preparation: On a smooth lacquered surface the paint holds less well. After degreasing, lightly sand the leather with very fine sandpaper and the paint will adhere better.
Not sure about the color? Screens can be deceiving. That's why our online color chart features real photos of dyed leather in every shade, patina and acrylic paint currently available in stock. Treat the color chart as a guide - the final color will always depend on the type of leather, the tanning process and the specific production batch.