Go to content | Go to main menu | Go to search
You are here: Pet Hardware Leather Dyes & Glues Leather Finishes Angelus Acrylic Finisher – Protective Finish (High Gloss): 29.5 ml
The High Gloss version delivers a bold, deep shine with a strong mirror-like effect. It suits projects that call for a “factory-fresh” look, such as dress shoes, designer handbags, or accessories.
Angelus Acrylic Finisher is an acrylic top coat designed to seal and protect dyed leather surfaces. This water-based finish dries into a continuous, highly flexible film that “locks in” the color and helps protect it from cracking, peeling, and everyday environmental wear.
Recommended application: Apply only after the final coat of dye has fully dried. For maximum shine, we recommend applying two to three very thin coats. Apply with a sponge, cloth, brush, or spray gun. Before regular wear or heavy use, allow the finish to fully cure for at least 24 hours.
Original name: Angelus Acrylic Finisher - High Gloss
Blog post: Leather Finish Guide: Sealer, Wax or Oil
High Gloss shows every flaw. A speck, dust or a small unevenness on the leather is visible under high gloss, so it suits dress shoes and designer accessories where the shine is meant to be there. For the deepest gloss I apply several very thin coats; the maker states two to three.
Whether I use a sponge or a brush, I keep the strokes smooth and light. The mistake is going back over the same spot with the brush when the finish starts to dry: I whip bubbles into it or leave marks that look bad once cured. I leave the finish to cure for at least 24 hours; only then is the surface resistant to scratches and fingerprints.
Enter your email and we'll send you one notification when this product is back in stock. Nothing more.
You've signed up for back in stock notifications. We'll let you know as soon as this item is available again.