Inner width: 10–50 mm, Material: steel, Breaking load: up to 300 kg, 10 pcs/pack
● In stock
from 0.148 € / pc from 50 pcs
Green collar and braided paracord lead
Paracord lacing edges the green collar, while the lead pairs green and tan cord. The buckle, D-ring and snap hook have a gold-tone finish.
Crafted from these components
Prices include 21% VAT. More about VAT and customs fees.
-
Bolt Snap 70 mm/13 – Gold Tone
Length: 70 mm, Eye width: 13 mm, zinc die casting, Breaking load: up to 150 kg, 10 pcs/pack
● In stock
0.693 € / pc from 50 pcs
-
Waterproof Webbing – Hunter Green
Width: 16–25 mm, Material: rubberized PP webbing, 30 m/pack
● In stock
from 0.91 € / m from 30 m
-
Double Bar Collar Buckle – Gold Tone, 10–40 mm
Inner width: 10, 13, 16, 20, 25, 40 mm, Material: zinc die casting, 10 pcs/pack
● In stock
from 0.466 € / pc from 50 pcs
-
Paracord ø 4 mm – Sand
Package quantity: 30 m, Material: polyamide, Breaking load: 270 kg, 30 m/pack
● In stock
0.295 € / m
-
Paracord ø 4 mm – Emerald Green
Package quantity: 30 m, Material: polyamide, Breaking load: 270 kg, 30 m/pack
● In stock
0.295 € / m
-
Double Cap Rivet – Brass Plated (1000 pcs)
Length: 7–13 mm, Material: steel, 1000 pcs/pack
● In stock
from 14.08 € / pack from 10 packs
-
Eyelet ø 5.2 mm (1000 pcs) – Brass, Gold-Tone
Eyelet height: 0.2–5.5 mm, Material: brass, 1000 pcs/pack
● In stock
from 7.72 € / pack
11.03 € -
Eyelet ø 5.2 mm (1000 pcs) – Brass, Gold-Tone
Eyelet height: 0.2–5.5 mm, Material: brass, 1000 pcs/pack
● In stock
from 7.72 € / pack
11.03 € -
Stainless Dog ID tag – Brass Plated
Stainless dog ID tag, 30 mm in diameter, with colour finish brass plated. A practical accessory that fits any collar.
● In stock
0.750 € / pc from 100 pcs
-
Rubberizing Gel for Webbing Edge Finishing 250 ml
A water-based gel for finishing the cut edges of waterproof webbing.
● In stock
18.20 € / 250 ml
-
Razor Plier Craftool
These pliers will make your work easier whether you need to cut leather, polypropylene or waterproof webbing quickly and accurately.
● In stock
23.76 € / pc
-
Replacement punches ø 3–4 mm
Replacement punches ø 3–4 mm for the manual press #3990-00 with the punching die #21-1700-HMA-set, or for the steel handle #21-HPHSTP-975-NO.
● In stock
from 32.53 € / pc
-
Replacement punches ø 5.2–6 mm
For the hand press #3990-00 with the punching die #1719-PH.
● In stock
from 32.53 € / pc
-
Craftool Multi-Size Strap End Punch 19–45 mm
Size: 19, 25, 38, 45 mm, Material: not specified
This hand-forged Craftool punch cuts a clean, symmetrical English point in a single strike.● In stock
from 56.29 € / pc
-
Craftool Round End Punch 19–38 mm
Size: 19, 25, 38 mm, Material: steel
The Craftool hand-forged half-round punch creates a clean, symmetrical radius on a belt end in a single strike.● In stock
from 56.29 € / pc
-
Craftool Round End Punch 19–38 mm
Size: 19, 25, 38 mm, Material: not specified
The Craftool hand-forged half-round punch creates a clean, symmetrical radius on a belt end in a single strike.● In stock
from 56.29 € / pc
-
Hand press
The manual lever press makes hardware installation easier whenever a traditional hand setter and hammer are no longer enough.
● In stock
135.64 € / pc
-
Hand Press Die Round Tube Punch Adapter with Anvil ø 7.5 mm
The Hand Press Die Round Tube Punch Adapter for press #3990-00 comes with a brass anvil and is designed to hold round tube punches #211700STP-6 and #211700STP-8.
● In stock
51.18 € / pc
-
Hand Press Die Round Tube Punch Adapter ø 9 mm
An adapter for the #3990-00 press, designed to securely hold the #211700STP-12 and #211700STP-14 punching dies.
● In stock
32.53 € / pc
-
Press Die Eyelets ø 3.6–7 mm
Setter for all our eyelets. Fits our Hand Press #3990-00.
● In stock
from 56.30 € / pc
-
Setting dies for our Double Cap Rivet ø 6–12 mm
Fits our Hand Press #3990-00.
● In stock
from 56.30 € / pc