Eyelet ø 5.2 mm (1000 pcs) – Brass-Plated Brass

Eyelet ø 5.2 mm (1000 pcs) – Brass-Plated Brass New - None % Clearance Brass Nickel Tested

Example of use #1: Eyelet ø 5.2 mm (1000 pcs) – Brass-Plated Brass

Example of use #2: Eyelet ø 5.2 mm (1000 pcs) – Brass-Plated Brass

Example of use #3: Eyelet ø 5.2 mm (1000 pcs) – Brass-Plated Brass

Example of use #4: Eyelet ø 5.2 mm (1000 pcs) – Brass-Plated Brass

Example of use #5: Eyelet ø 5.2 mm (1000 pcs) – Brass-Plated Brass

Code: BE10x5.2

Availability: In Stock 132 packs

Brass eyelet with inside ø 5.2 mm, for reinforcing holes in leather or fabrics. The eyelets can be set using the #3990-00 press with #3992-E6x5.0 die. For setting by hand, we offer the #8101-E6x5.0 eyelet setter. The size or the piston or head setter must be selected according to the size of the eyelet. You can also find a suitable tool among the products recommended below. The correct tool for your eyelet size will be displayed. Washers for the eyelets "W" must be purchased separately. The quoted price is for the entire pack.

TIP: For hard and stiff, unyielding materials, the eyelet can be used without a washer. For other applications we recommend using a washer that would prevent the eyelet from getting torn out. The video below the picture will show you how to choose the correct size and how to attach the eyelet properly.

INFO: We recommend using this type of eyelets in combination with a high washer exclusively for our waterproof webbings and leathers. These grommets are not suitable for polypropylene webbings.

Material: Brass
Surface finish: Brass plated

Weight: 238 g

Blog post: How to rivet eyelets