Double Cap Rivet – Brass, Gold-Tone (1000 pcs)

Product code: 6x10 BOJ/17,20
In Stock 25 packs
Double cap saddlery rivet with a notch near the tip of the stem that speeds up the riveting process, primarily for belts, collars and harnesses, and increases the strength of the join. Double cap rivets are used where both sides of the rivet will be visible, or where a rivet comes in contact with other surfaces (bag handles, leashes, collars, harnesses …). Specially designed for solid brass swivels #BOJ/17, #BOJ/20 and #BOJ/25. The price listed is for the entire package (1000 pcs).

For proper riveting, it is essential to choose the right tool both for creating the hole and for setting the rivet itself. For making the hole, we recommend punches #KEM/LSHP30 or #211700STP-6. For riveting using the hand press #3990-00, use dies #3997-20 Z. For manual riveting, tools #8101-20 Z or #RS/6x100 are suitable. The size of the die or setting tool must always be selected according to the rivet size. You can also find suitable riveting tools among the recommended products below. The correct tool will be displayed based on the rivet size you select. The size of piston or setter must be selected to match the size of the rivet. Or you can find the proper riveting tool among the products recommended below. The correct tool will be displayed for the rivet size that you choose.

Info: If the rivet is rubbed intensely, the gold finish may wear away and a silver layer may appear on the surface. This does not mean that the rivet is not brass. Even if the color changes, the quality of the rivet remains the same. See FAQ Brass rivets changed their color to silver over time. How is this possible? for more information.
Product code 6x10 BOJ/17,20
Material Brass
Surface finish Brass plated
Weight 419 g

Blog post: Riveting guide

Product variants and parameters
All variants
Shank length: 10 mm Shank diameter: 3 mm Quantity per Pack: 1000
6 mm
8 mm
Dimensions may vary by ±10%

Enter a quantity to see the total price incl. 21% VAT

Total for 1 pack 78.82 €

Added!

  • 1

    Base price from 1 pack 78.82 €/1000 pcs

  • 10

    Carton price from 10 packs 70.94 €/1000 pcs 10% cheaper per pack Lowest price per pack

About us 37 years supplying hardware to makers and workshops, 103,325 customers so far.

Why buy from Pet Hardware®

We'll let you know when it's back

Enter your email and we'll send you one notification when this product is back in stock. Nothing more.

Frequently asked questions

Yes, the smallest quantity is one bag of rivets or 100 snaps. We don't offer smaller packs.

  • Rivets and Chicago screws are sold in bags. Most bags contain 100 pcs, bags of rhinestone rivets also 50 pcs, and bags of eyelets and cap rivets usually 1,000 pcs. Brass and stainless steel Chicago screws and some double cap rivets also come in bags of 10.

  • Snap fasteners and button studs are sold individually, from 100 pcs of one type.

The number of pieces per bag and the price per piece are shown on each product. We'll send you a sample to try. See Can I get a product sample?

The total thickness of the layers you're joining decides. Add the shank overhang needed for spreading: the shank should be 2–3 mm longer than the material thickness.

The shank length is listed on each rivet's product page in the variants table as dimension B. The full range is in the Rivets & Screws category.

The hole diameter differs by material. For leather, choose a punch slightly smaller than the shank diameter: leather is elastic and grips the shank tightly. For waterproof webbing, choose a punch that matches the shank exactly; the webbing doesn't stretch, so the shank has to pass through without being forced.

A shank that's too long shows up as a rivet that deforms while spreading, or caps that don't line up.

Often bought together