Double Cap Rivet – Brass, Nickel-Tone (1000 pcs)

Product code: B70 Z - NF
In Stock 132 packs
This two-part double cap saddlery rivet has a very useful notch near the tip of the stem, which lets you rivet belts, collars and harnesses faster and makes the join stronger. Use double cap rivets where both sides of the rivet will be visible, or where the rivet comes in contact with other surfaces (purse and other handles, leashes, collars, harnesses, …). The price listed is for the entire package (1000 pcs).

Choose the right tool both for punching the hole and for setting the rivet. Punch the hole with a hole punch or drive punch whose diameter matches the diameter of the rivet stem (dimension A). Set the rivet with the #3990-00 hand press and a die; without a press, use a hand setter. Always choose the size of the die or setter according to the rivet size. You will find suitable tools among the recommended products below.

INFO: These brass rivets boast a surface treatment composed of tin and a special nickel-free admixture.

Properties

Material · Brass

Brass does not rust and develops a warm patina over time

Surface finish · Nickel tone

Nickel-free tin finish, a safe choice for people and dogs with nickel allergy

Working with it

A notch on the shank speeds up riveting and strengthens the joint

Use

Both sides finished with a cap, suited to collars, leashes and bag handles

Sizes

Three shank lengths from 10 to 13 mm for different material thicknesses

More information

Product code B70 Z - NF
Weight 800 g

Blog post: Riveting guide

Product variants and parameters
All variants
Quantity per Pack: 1000
10 mm 3 mm 10 mm
11 mm 4 mm 12 mm
13 mm 4 mm 12 mm
Dimensions may vary by ±10%

Enter a quantity to see the total price incl. 21% VAT

Total for 1 pack 100.85 €

Added!

  • 1

    Base price from 1 pack 100.85 €/1000 pcs

  • 5

    Carton price from 5 packs 90.76 €/1000 pcs 10% cheaper per pack Lowest price per pack

About us 37 years supplying hardware to makers and workshops, 103,325 customers so far.

Why buy from Pet Hardware®

We'll let you know when it's back

Enter your email and we'll send you one notification when this product is back in stock. Nothing more.

Frequently asked questions

Yes, the smallest quantity is one bag of rivets or 100 snaps. We don't offer smaller packs.

  • Rivets and Chicago screws are sold in bags. Most bags contain 100 pcs, bags of rhinestone rivets also 50 pcs, and bags of eyelets and cap rivets usually 1,000 pcs. Brass and stainless steel Chicago screws and some double cap rivets also come in bags of 10.

  • Snap fasteners and button studs are sold individually, from 100 pcs of one type.

The number of pieces per bag and the price per piece are shown on each product. We'll send you a sample to try. See Can I get a product sample?

The total thickness of the layers you're joining decides. Add the shank overhang needed for spreading: the shank should be 2–3 mm longer than the material thickness.

The shank length is listed on each rivet's product page in the variants table as dimension B. The full range is in the Rivets & Screws category.

The hole diameter differs by material. For leather, choose a punch slightly smaller than the shank diameter: leather is elastic and grips the shank tightly. For waterproof webbing, choose a punch that matches the shank exactly; the webbing doesn't stretch, so the shank has to pass through without being forced.

A shank that's too long shows up as a rivet that deforms while spreading, or caps that don't line up.

Often bought together