Aluminium Triangle Buckle – Anodized
Product code:
AHT/40 S
In Stock 827 pcs
This aluminium triangle for harnesses works as an alternative to classic D-rings. The cast body with a fixed crossbar reduces the weight of the finished product.
Construction and specifications
- Weight and breaking load: The fitting weighs 11 g and has a breaking load of 350 kg. The original zinc alloy version in the same width is heavier (35 g) and has a breaking load of only 150 kg.
- Bottom slot: Has an inner height of 8 mm. Allows the webbing to be sewn in firmly or riveted.
- Top eye: Inner dimensions are 30 × 20 mm. Used for attaching a snap hook.
Limitations and notes for makers
- Material thickness of 6 mm: The top eye requires a snap hook with a matching gate opening.
- Slot limitation: The 8 mm height does not allow a second free end of the webbing to pass through. The fitting cannot be used for collars with a pin buckle.
Use and recommended hardware
Two of these fittings can be used together on a harness. One forms the main attachment point on the back. The other sits on the chest to redirect the pull when walking the dog.
A compatible gate opening for the 6 mm thickness is available on the aluminium snap hooks in our range. Using them will help keep the overall weight of the assembly to a minimum.
We'll let you know when it's back
Enter your email and we'll send you one notification when this product is back in stock. Nothing more.
