Go to content | Go to main menu | Go to search
You are here: Pet Hardware Ropes & Cords Cord End Caps Brass Cord End Cap – Nickel Plated
An unsecured rope end frays, and tape on it looks like a last-minute fix. This brass cord end cap with an inner diameter of 4.8–14 mm hides the cut or melted end of your rope inside metal, keeps it in shape, and gives you a neat finish for leashes, collars, bags, handles, or decorative hangings.
How to use: Cut the rope straight, and if you like, lightly melt the end. Degrease both the inside of the end cap and the rope. Glue with a hot glue gun or trusty Loctite 401 #8142575. Let it cure fully, with no "let’s see if I can pull it off right away" impatience.
The brass cord end cap is a small part that causes the most trouble at the moment when the glue is already inside and the rope will not go in. That is why I always try it dry first. After melting, polypropylene rope forms a mushroom at the end that is wider than the rope itself, so I squeeze it into a cylinder with pliers while it is still warm. Coated rope only needs a straight cut, as there is nothing in it to fray.
I use little glue and give the end cap a slight turn as I push it on, so the glue spreads over the wall. Whatever runs out leaves a white haze on the metal and the rope below the end cap goes hard, and that I cannot put right. The end cap also cannot be squeezed shut like a brass rope clamp, so only glue and friction hold it. I therefore put it only on a free end that nothing pulls on. The clamp takes the strain. The end cap is the full stop at the end of the leash, and if a dog tugs on it regularly, sooner or later it works loose.
Enter your email and we'll send you one notification when this product is back in stock. Nothing more.
You've signed up for back in stock notifications. We'll let you know as soon as this item is available again.