Stainless Steel Belt Buckle with Keeper 35 mm

Product code: DK9946BSS/35
In Stock 648 pcs

This stainless steel buckle secures the belt strip using two hex set screws. When you assemble a belt, it fully replaces stitching or riveting at the attachment point.

Material and Construction

  • Stainless steel: both the body and bar offer lasting resistance to corrosion from water and sweat. The surface has a brushed finish. There is no lacquer or plating layer, so there is nothing to peel – and any minor scratches from everyday use are less noticeable than on a polished version.
  • Integrated keeper: the keeper is a fixed part of the buckle body. Its rounded edges reduce friction and limit wear on the leather edges each time the belt strip is threaded through.

Assembly Requirements and Joint Limits

  • Belt strip dimensions: the mounting space is designed for a belt strip exactly 35 mm wide and no more than 3.8 mm thick.
  • Thread locking required: to prevent loosening caused by movement, apply Loctite® 243 thread locker #1918997 to the set screw threads. The screws are tightened with a hex key.
  • Weight and design: the buckle weighs 63 grams. Its modern brushed look is not suited for historical reproductions or pieces that call for a natural patina.

Recommended Tools for the 3 mm Bar

  • Oval hole punch #3778-05 – used to punch through holes in the belt strip that the buckle's 3 mm bar slots into when fastening the belt.
Product code DK9946BSS/35
Material Stainless steel casting
Surface finish Brushed
Weight 63 g
Product variants and parameters
Inner width Total length Number of prongs
35 mm 73 mm 3 mm 1
Dimensions may vary by ±10%

Enter a quantity to see the total price incl. 21% VAT

Total for 1 pc 22.92 €

Added!

  • 1

    Base price from 1 pc 22.92 €/pc

  • 10

    Package price from 10 pcs 13.10 €/pc 43% cheaper per piece

  • 500

    Carton price from 500 pcs 11.79 €/pc 49% cheaper per piece Lowest unit price

About us 37 years supplying hardware to makers and workshops, 103,325 customers so far.

Why buy from Pet Hardware®

We'll let you know when it's back

Enter your email and we'll send you one notification when this product is back in stock. Nothing more.

Frequently asked questions

Choose a buckle with the same or a slightly larger inner width than the strap. The number in the buckle's name is its inner width: a 38 mm strap fits a 38 mm buckle snugly and a 40 mm buckle with a little play.

Often bought together