Waterproof Webbing – Neon Orange

Waterproof webbing with a width of 10–38 mm, colour neon orange, for collars, leashes and long training leads. It is also strong enough for equestrian gear and outdoor equipment.

Material and Properties

• Strong textile core: maintains its strength under load and does not stretch, so even collars for powerful dogs keep their shape.
• Smooth PVC coating: waterproof and UV resistant. It stays flexible even in extreme cold without becoming brittle, tested for flex resistance down to -40 °C.
• Easy to clean: simply wipe off mud with a damp cloth or rinse with water. The webbing does not absorb sweat or odors.
• No fraying: cut edges stay clean without fraying, so there is no need to seal them with a flame.

Verified Material Performance

Design with confidence using laboratory-tested data rather than estimates. We tested the tensile strength under direct pulling force, while low-temperature flexibility was verified through bending tests. Detailed results for each webbing width are available in the Documents to download section. The material is also certified as safe for prolonged contact with both human and animal skin.

Important for manufacturers: Laboratory values apply to the material before processing. Every hole made for a rivet or buckle pin cuts through the textile core and weakens the webbing at that point. The best practice is simple: use the smallest punch that still fits the rivet shank or buckle tongue, and reinforce highly stressed holes with a metal eyelet. A large, unreinforced hole is usually the first place where the webbing will fail under load.

Thickness for collars: for collars and other products with holes for a buckle tongue, choose the 2.5 mm webbing. The thinner 1.5 mm webbing is available in black only, and we do not recommend it for these products. In our own test on 25 mm wide webbing, the breaking load at the buckle was about 50 kg for the 1.5 mm webbing and 150–180 kg for the 2.5 mm webbing.

Recommended Tools and Equipment

• Razor pliers: produce clean, straight cuts without deforming the webbing ends.
• Punches Ø 3–4 mm: punch small rivet and buckle pin holes while minimizing damage to the textile core.
• Punches Ø 5.2–6 mm: use a 5.2 mm punch for E10x5.2 eyelets and a 6 mm punch for E12x6.0.
• Strap end punches: create clean strap ends every time.
• Hand press: provides accurate hole punching and clean eyelet setting.
• Nubio Opaco: seals the cut edge, covers the exposed textile core and protects it against moisture and dirt.

Packaging and Roll Length

The webbing is supplied in rolls of 30 m. Each production roll may contain up to 3 factory joins, so the entire length is not always supplied as one continuous piece. If you require longer uninterrupted sections, inspect the roll before cutting.

For orders of 1,200 m or more per colour and width, we can arrange custom production in additional colour combinations.