Rubberizing Gel for Webbing Edge Finishing 250 ml: White
Product code:
NUBIO OPACO/250
In Stock 343 pcs
A water-based gel for finishing the cut edges of waterproof webbing. It gives the edge volume, a rubberized surface and a matte finish, so the white core no longer shows through.
Say goodbye to raw webbing edges where a white core shows through, easily gets dirty, and ruins the overall impression. With Girba Nubio, your edges will match the webbing material in color and will look as if they were designed that way from the start.
The color can also be adjusted. Once the Nubio layer dries, apply Angelus acrylic paint to create a cohesive look that matches the webbing color. Recommended shades can be easily found for each type of waterproof webbing.
Product Features
- Rubberizing effect: Adds volume to edges and gives them a unique appearance.
- Matte finish: An elegant touch without gloss.
- Easy to use: Simply apply to the raw edge of waterproof webbing and let it dry.
- Coloring option: Easily customizable using Angelus acrylic paints.
Instructions for Use
- Degrease the edge with isopropyl alcohol (IPA) and wait until it has evaporated completely.
- Apply the gel to the raw edge of waterproof webbing. One or two layers are enough to cover the edge; for a rounded "rubberized" shape, apply three thin layers.
- Let each layer dry for at least an hour before applying the next.
- Coat with Angelus paint.
- Admire the result.
🎥 Want to see the entire process step by step? Check out our tutorial: How to Finish the Edges of Waterproof Webbing Step by Step
Technical Details
- Volume: 250 ml – enough for many pieces and experiments.
- Type: Matte finish, water-based, without latex.
- Storage: the gel must not freeze or be exposed to cold during storage or transport, as this changes its properties and reduces adhesion.
- Use: For cut edges of waterproof webbing.
Product code
NUBIO OPACO/250
Weight
284 g
Pantone Colour
11-4001
11-4001
The number refers to the closest PANTONE® colour. On-screen colour is only a guide; use a physical PANTONE® guide when an exact match matters.
Documents to download
Workshop opinion
Pavla NovákováI put it on the workbench first. You get facts instead of guesses.
I use the gel to finish the cut edges of waterproof webbing. Once dry, the edge looks like a natural part of the webbing, with no exposed fabric and no distracting cut line. The gel is thick enough for me to apply it with an ordinary awl, so I need no special equipment. A layer of Angelus paint can go on top of the edge.
When the gel is too runny, I pour the amount I need into a small dish I am about to use and let it air for about 10 minutes at around 18 °C. A higher temperature shortens the airing time. This thickens the gel, makes it easier to control and stops it running. The first time I used it I was not sure I could apply it so the edge would look good, and it took me a while to get the hang of it.
We'll let you know when it's back
Enter your email and we'll send you one notification when this product is back in stock. Nothing more.
