A Markdown version of this page is available at https://www.pethardware.com/en/single-cap-rivets/copper-rivets-burrs-3532/index.md
Copper Rivets & Burrs
Code:
11282-00
Rustproof, heavy-duty permanent fasteners. Single cap rivets are used in places where only one side of the rivet is visible (belts, trunks, flap closure leather bags, … ).
For hand setting, the
#RT/11X20X120 SS setter is used. All useful hints and tips for working with copper rivets can be found in the video below the picture.
PLEASE NOTE: These rivets from Tandy are now being sold out. A new version of copper rivets can be found under the code
#RCH09.
We'll let you know when it's back
Enter your email and we'll send you one notification when this product is back in stock. Nothing more.
Frequently Asked Questions
How do I choose the right rivet length?
The total thickness of the layers you're joining decides. Add the shank overhang needed for spreading: the shank should be 2–3 mm longer than the material thickness.
The shank length is listed for every rivet in the dimensions table as dimension B — the full range is in the Rivets & Screws category.
The hole diameter differs by material. For leather, choose a punch slightly smaller than the shank diameter — leather is elastic and grips the shank tightly. For waterproof webbing, choose a punch that matches the shank exactly; the webbing doesn't stretch, so the shank has to pass through without being forced.
A shank that's too long shows up as a rivet that deforms while spreading, or caps that don't line up.
