Collar Loop – Brass

Product code: 4950 UB/13
In Stock 6,549 pcs

A brass loop that holds firm. This is exactly why manufacturers of collars, harnesses, and bags choose metal. Unlike plastic, a brass loop withstands long-term use without deformation, so the webbing adjustment stays precise.

  • No more loose ends: The loop reliably secures the free end of the webbing. Nothing slips out, and everything stays exactly where it should.
  • Choose the size by load: The breaking load of each size is listed in the parameters. Load the part to no more than a tenth of its breaking load, so for large-breed collars or heavy bags choose a loop with a higher value.
  • Refined appearance: On leather goods, metal hardware not only increases durability but also pairs well with buckles, D-rings, and snap hooks.
  • Smooth adjustment and durability: The loop resists friction during frequent strap adjustments. Thanks to its rounded edges, it does not cut into the material and protects both webbing and leather from premature wear.

Brass is slightly heavier than plastic. It pays off on collars, harnesses and bags where the webbing is adjusted often.

Non-welded joint: The joint of this loop is not welded, so it can open up under heavy load.

TIP: Brass naturally oxidizes and darkens over time – it’s not a defect, just the metal reacting with air. You can restore its shine with #SITOL300G paste. To prevent darkening, apply the clear lacquer #637005/GLOSSY.

Product code 4950 UB/13
Breaking load 25 kg
Material Brass
Surface finish Polished
Weight 1 g

Workshop opinion

Pavla NovákováI put it on the workbench first. You get facts instead of guesses.

On leather collars a loop is a must; it holds the free end of the strap so it does not flap about. The biggest trap is thickness. When I fold over the free end of a leather collar, I am at 6–8 mm straight away. If I also line the collar with felt or soft leather, it is even more. This loop is low so it does not look bulky on the dog's neck, and that shows in a smaller opening.

Before ordering, I measure the full thickness of the material "sandwich" with calipers and compare it with the loop's inner opening listed on the product. Finding out on a finished collar that the loop will not slide on is infuriating. The loop also works for hanging an ID tag, so it does not swing about on the dog.

Product variants and parameters
Inner width Inner height
13 mm 6 mm 2 mm
17 mm 6 mm 3 mm
20 mm 10 mm 3 mm
25 mm 10 mm 3 mm
30 mm 12 mm 3 mm
40 mm 12 mm 3 mm
50 mm 12 mm 3 mm
Dimensions may vary by ±10%

Enter a quantity to see the total price incl. 21% VAT

Total for 10 pcs 2.88 €
0.288 €/pc incl. 21% VAT

Added!

  • 10

    Base price from 10 pcs 0.288 €/pc

  • 50

    Package price from 50 pcs 0.165 €/pc 43% cheaper per piece

  • 5000

    Carton price from 5000 pcs 0.148 €/pc 49% cheaper per piece Lowest unit price

About us Hardware, leather and tools under one roof. For collars, leashes, halters, belts and handbags.

Why buy from Pet Hardware®

We'll let you know when it's back

Enter your email and we'll send you one notification when this product is back in stock. Nothing more.

Often bought together