Hook and loop – Black
Code:
SU16/B
Availability:
In Stock 470 m
Forget wrestling with shoelaces or fiddly little buttons – a hook-and-loop fastener in 16–25 mm width means anyone can handle the closure. Kids, seniors, or anyone whose hands shake like it’s their first date will appreciate the speed and simplicity that saves both time and nerves.
- Millimeter precision – no pre-set holes, no “too tight or too loose.” Adjust the grip exactly as you need, whether it’s on a brace or a jacket sleeve.
- Versatility beyond tactical gear – ideal for quick replacement of patches, pockets, or modular accessories. You stitch the base panel on once, and then simply swap the equipment according to your current needs in seconds.
- Fast production with minimal waste – we supply the hook-and-loop fastener in a 25m roll with a maximum of 3 joins, so you won’t curse short pieces when cutting and you’ll save material.
- Cheaper and easier to apply – no zippers to jam, no complicated holes. Just sew on the hook-and-loop and you’re good to go.
Workshop opinion
Pavla Nováková
A specification can tell you plenty. The workbench tells you the rest, so that is where I test it.
In leathercraft, hook-and-loop fastener works best for me when I treat it as a “consumable” and already plan for future servicing during production. I always trim the corners into a rounded shape – sharp ones tend to lift over time and catch on everything around them. When stitching, I also recommend sewing close to the edge of the woven tape so the fastener does not twist and dirt cannot work its way underneath.
Orientation matters as well: stitch the rougher hook side onto the part that is handled less frequently so it does not snag on sleeves or gloves when opened. If the fastener stops holding, in 90% of cases it is simply clogged. Just clean hair and fibers out of the hook side and it will “bite” again. If the loop side has become worn and matted, you can sometimes carefully trim it with scissors to give the hooks something to grip, but at that stage it is usually better to unpick the piece and replace it with a new one.
Keep in mind that mud and hair quickly reduce the fastening performance. And one small tip for hunters: in the silence of the woods, hook-and-loop fastener tears louder than a cone snapping underfoot – for “silent operations,” traditional buckles are the better choice. For braces, children’s footwear, or outdoor gear, however, it remains an unbeatable solution.
– Pavla Nováková
I put it on the workbench first. You get facts instead of guesses.
I put it on the workbench first. You get facts instead of guesses.
We'll let you know when it's back
Enter your email and we'll send you one notification when this product is back in stock. Nothing more.
