Inner width: 16–50 mm, Material: steel, Breaking load: up to 300 kg, 10 pcs/pack
● In stock
from 0.358 € / pc from 50 pcs
Green 25 mm collar with rainbow hardware
Green waterproof webbing meets the rainbow surface of neo-chrome hardware. See the fittings alongside the coloured strap and find their links below.
Crafted from these components
Prices include 21% VAT. More about VAT and customs fees.
-
Metal Tri-Glide – Neo-Chrome
Inner width: 16, 20, 25, 30, 38, 50 mm, Material: zinc die casting, 10 pcs/pack
● In stock
from 0.657 € / pc from 50 pcs
-
Metal Side Release Buckle – Neo-Chrome
Inner width: 16–38 mm, Material: zinc die casting, Breaking load: up to 200 kg, 10 pcs/pack
● In stock
from 2.19 € / pc from 50 pcs
-
Collar Loop – Neo-Chrome
Inner width: 16, 20, 26, 29, 40 mm, Material: steel, 10 pcs/pack
● In stock
from 0.358 € / pc from 50 pcs
-
Hexa Waterproof Webbing – Caribbean Green
Width: 10–25 mm, Material: rubberized PP webbing, 30 m/pack
● In stock
from 0.743 € / m from 30 m
-
Double Cap Rivet – Neo-Chrome (10 pcs)
Length: 7–10 mm, Material: steel, 10 pcs/pack
● In stock
from 2.91 € / pack from 10 packs
-
Razor Plier Craftool
These pliers will make your work easier whether you need to cut leather, polypropylene or waterproof webbing quickly and accurately.
● In stock
23.76 € / pc
-
Replacement punches ø 3–4 mm
Replacement punches ø 3–4 mm for the manual press #3990-00 with the punching die #21-1700-HMA-set, or for the steel handle #21-HPHSTP-975-NO.
● In stock
from 32.53 € / pc
-
Craftool Round End Punch 19–38 mm
Size: 19, 25, 38 mm, Material: not specified
The Craftool hand-forged half-round punch creates a clean, symmetrical radius on a belt end in a single strike.● In stock
from 56.29 € / pc
-
Hand press
The manual lever press makes hardware installation easier whenever a traditional hand setter and hammer are no longer enough.
● In stock
135.64 € / pc
-
Hand Press Die Round Tube Punch Adapter with Anvil ø 7.5 mm
The Hand Press Die Round Tube Punch Adapter for press #3990-00 comes with a brass anvil and is designed to hold round tube punches #211700STP-6 and #211700STP-8.
● In stock
51.18 € / pc
-
Setting dies for our Double Cap Rivet ø 6–12 mm
Fits our Hand Press #3990-00.
● In stock
from 56.30 € / pc