Inner width: 10–50 mm, Material: steel, Breaking load: up to 300 kg, 10 pcs/pack
● In stock
from 0.148 € / pc from 50 pcs
Black collar with gold-tone hardware
The black webbing collar has a gold-tone metal side-release buckle and a round tag. The rope lead has a black clamp beside the snap hook.
Crafted from these components
Prices include 21% VAT. More about VAT and customs fees.
-
Metal Tri-Glide – Gold Tone, 16–50 mm
Inner width: 16, 20, 25, 30, 38, 50 mm, Material: zinc die casting, 10 pcs/pack
● In stock
from 0.295 € / pc from 50 pcs
-
Metal Side Release Buckle Plus – Gold Tone
Inner width: 10–38 mm, Material: zinc die casting, Breaking load: up to 230 kg, 10 pcs/pack
● In stock
from 1.24 € / pc from 50 pcs
-
Collar Loop – Gold Tone
Inner width: 16, 20, 26, 30, 40, 50 mm, Material: steel, 10 pcs/pack
● In stock
from 0.148 € / pc from 50 pcs
-
Rope snap hook for leashes 55 mm/13 – Gold Tone
Length: 55 mm, Eye width: 13 mm, zinc die casting, Breaking load: up to 113 kg, 10 pcs/pack
● In stock
0.785 € / pc from 20 pcs
-
Waterproof Webbing – Black
Width: 10–50 mm, Material: rubberized PP webbing, 30 m/pack
● In stock
from 0.67 € / m from 30 m
-
Rope – Black
Diameter: 6–16 mm, Material: polypropylene, Minimum quantity: 10 m
● In stock
from 0.194 € / m from 120 m
-
Steel Rope Clamp – Black
A coated matte black steel rope clamp is used for joining 6–12 mm thick rope.
● In stock
from 0.250 € / pc from 20 pcs
-
Stainless Dog ID tag – Brass Plated
Stainless dog ID tag, 30 mm in diameter, with colour finish brass plated. A practical accessory that fits any collar.
● In stock
0.750 € / pc from 100 pcs
-
Poly Cutting Board 30x30 cm
This cutting mat protects your tools and work surfaces while you punch.
● In stock
25.01 € / pc
-
Razor Plier Craftool
These pliers will make your work easier whether you need to cut leather, polypropylene or waterproof webbing quickly and accurately.
● In stock
23.76 € / pc
-
Steel-Plastic Mallet with Wooden Handle 594 g
When working, you need a tool you can fully rely on.
● In stock
43.22 € / pc
-
Replacement punches ø 3–4 mm
Replacement punches ø 3–4 mm for the manual press #3990-00 with the punching die #21-1700-HMA-set, or for the steel handle #21-HPHSTP-975-NO.
● In stock
from 32.53 € / pc
-
Steel Handle for Punches
The Steel Handle for Punches #211700STP-6 and #211700STP-8 lets you punch by hand, without a press.
● In stock
41.40 € / pc
-
Craftool Round End Punch 19–38 mm
Size: 19, 25, 38 mm, Material: not specified
The Craftool hand-forged half-round punch creates a clean, symmetrical radius on a belt end in a single strike.● In stock
from 56.29 € / pc
-
Hand press
The manual lever press makes hardware installation easier whenever a traditional hand setter and hammer are no longer enough.
● In stock
135.64 € / pc
-
Setting dies for our Double Cap Rivet ø 6–12 mm
Fits our Hand Press #3990-00.
● In stock
from 56.30 € / pc