Brass Cord End Cap – Brass Plated

Product code: CEC B/4.8x5.3
Out of stock Expected on Jan. 1, 2027

Set the alert. We will watch the shelf and email you when this product is back. Notify me

An unsecured rope end frays, and tape on it looks like a last-minute fix. This brass cord end cap with an inner diameter of 4.8–14 mm hides the cut or melted end of your rope inside metal, keeps it in shape, and gives you a neat finish for leashes, collars, bags, handles, or decorative hangings.

  • Corrosion resistance: rain, mud, humidity: brass shrugs it off. Unlike plastic, it won’t crack in the cold or go soft in the heat.
  • Clean design: no fraying, no fuzzy fibers sticking out. The end cap covers it all up and gives your whole project a tidy, unified look.
  • Matches your hardware: with different finishes and color options, you can easily pair the end cap with your snap hook, ring, or buckle.

How to use: Cut the rope straight, and if you like, lightly melt the end. Degrease both the inside of the end cap and the rope. Glue with a hot glue gun or trusty Loctite 401 #8142575. Let it cure fully, with no "let’s see if I can pull it off right away" impatience.

Product code CEC B/4.8x5.3
Material Brass
Surface finish Brass plated
Weight 1 g

Workshop opinion

Pavla NovákováI put it on the workbench first. You get facts instead of guesses.

The brass cord end cap is a small part that causes the most trouble at the moment when the glue is already inside and the rope will not go in. That is why I always try it dry first. After melting, polypropylene rope forms a mushroom at the end that is wider than the rope itself, so I squeeze it into a cylinder with pliers while it is still warm. Coated rope only needs a straight cut, as there is nothing in it to fray.

I use little glue and give the end cap a slight turn as I push it on, so the glue spreads over the wall. Whatever runs out leaves a white haze on the metal and the rope below the end cap goes hard, and that I cannot put right. The end cap also cannot be squeezed shut like a brass rope clamp, so only glue and friction hold it. I therefore put it only on a free end that nothing pulls on. The clamp takes the strain. The end cap is the full stop at the end of the leash, and if a dog tugs on it regularly, sooner or later it works loose.

Product variants and parameters
Length
Out of stock 4.8 mm 5.2 mm
6 mm 7 mm
8 mm 7 mm
10 mm 10 mm
12 mm 10 mm
14 mm 13 mm
Dimensions may vary by ±10%

Enter a quantity to see the total price incl. 21% VAT

Total for 10 pcs 0.90 €
0.090 €/pc incl. 21% VAT

Added!

  • 10

    Base price from 10 pcs 0.090 €/pc

  • 100

    Package price from 100 pcs 0.051 €/pc 44% cheaper per piece

  • 1000

    Carton price from 1000 pcs 0.046 €/pc 49% cheaper per piece Lowest unit price

About us 37 years supplying hardware to makers and workshops, 103,325 customers so far.

Why buy from Pet Hardware®

We'll let you know when it's back

Enter your email and we'll send you one notification when this product is back in stock. Nothing more.

Often bought together