Stainless Steel Belt Buckle with Keeper 35 mm, rounded

Product code: DK9951SS/35
In Stock 596 pcs

This stainless steel buckle secures the belt strip using two hex set screws, replacing stitching or riveting at the joint when assembling a belt.

Material and Construction

  • Stainless steel: both the body and the bar permanently resist corrosion from water and sweat. The surface is mechanically polished only, with no lacquer or plating, so there is nothing to peel or flake.
  • Integrated keeper: the keeper is a fixed part of the buckle body. Its rounded edges reduce friction and limit wear on the leather edges each time the belt strip is threaded through during daily use.

Assembly Requirements and Joint Limits

  • Belt strip dimensions: the mounting slot is designed for a belt strip exactly 35 mm wide and no more than 3.8 mm thick.
  • Thread locking required: to prevent loosening caused by movement, apply Loctite® 243 #1918997 liquid thread locker to the set screw threads. The screws are tightened with a hex key.
  • Weight and design: the buckle weighs 65 grams. Its polished appearance is not suited to historical reproductions or pieces that call for a natural patina.

Recommended Tools

  • Craftool Oblong Hole Punch #3778-07 – used to punch through the belt strip, creating the holes the buckle bar engages when fastening the belt.
Product code DK9951SS/35
Material Stainless steel casting
Surface finish Polished
Weight 65 g
Product variants and parameters
Inner width Total length Number of prongs
35 mm 77 mm 4 mm 1
Dimensions may vary by ±10%

Enter a quantity to see the total price incl. 21% VAT

Total for 1 pc 21.71 €

Added!

  • 1

    Base price from 1 pc 21.71 €/pc

  • 10

    Package price from 10 pcs 12.40 €/pc 43% cheaper per piece

  • 500

    Carton price from 500 pcs 11.16 €/pc 49% cheaper per piece Lowest unit price

About us 37 years supplying hardware to makers and workshops, 103,325 customers so far.

Why buy from Pet Hardware®

We'll let you know when it's back

Enter your email and we'll send you one notification when this product is back in stock. Nothing more.

Frequently asked questions

Choose a buckle with the same or a slightly larger inner width than the strap. The number in the buckle's name is its inner width: a 38 mm strap fits a 38 mm buckle snugly and a 40 mm buckle with a little play.

Often bought together