Go to content | Go to main menu | Go to search
You are here: Pet Hardware Leather Dyes & Glues Leather Finishes Eco-Flo Easy Carve – Leather Softener (Concentrate): 236 ml
A specially developed, low-VOC water-based solution designed to prepare leather before carving, tooling, and wet forming.
It conditions the water so it soaks into the leather faster and penetrates deeper into the fibers. The leather becomes more pliable, responds better to tool pressure, and holds the right moisture level for much longer than when using plain water.
Recommended application: This is a concentrate and must be diluted with water. The standard mixing ratio is 1 part concentrate to 10 parts water. Apply the solution with a sponge to the grain side of natural vegetable-tanned leather and let it absorb. Start carving and tooling once the leather’s color begins returning to its original shade. The solution also works well for wet forming.
Original name: Eco-Flo Easy-Carve Concentrate
Blog post: Leather Finish Guide: Sealer, Wax or Oil
I tested the concentrate against plain water. When cutting with a swivel knife, it does not drag in the leather and the knife glides smoothly, so I can cut clean curves. Thanks to the solution, the water gets deeper into the fibres and the leather stays damp much longer, so with larger patterns I do not have to keep reaching for the sponge. I dilute it 1:10, that is one part concentrate to ten parts water.
With stamping, timing matters. Stamps bite best when the leather, after absorbing the solution, starts returning to its original colour but still feels cool to the touch. At that moment the fibres hold a deep, crisp impression.
Enter your email and we'll send you one notification when this product is back in stock. Nothing more.
You've signed up for back in stock notifications. We'll let you know as soon as this item is available again.