2 Sided Halter Square – Brass

Product code: B3690/20
In Stock 2,750 pcs

Ever seen a halter that actually keeps its shape, doesn’t twist, and doesn’t have a spaghetti mess of webbing on the side? That’s exactly where the 2-sided halter webbing square comes in. It keeps your webbing in line and gives you a solid eye for attaching a ring or snap hook – all in one piece, no extra connectors needed.

  • Clean, no-crossing webbing management – webbing stays flat, the halter twists less, and the geometry stays just where you want it.
  • Simpler than the 3-sided version – if you don’t need a third direction, the 2-sided solution is more compact and looks “lighter” on the head.
  • One-piece attachment eye – the round eye acts as a stable anchor for a snap hook or ring, so you don’t need to add extra hardware.
  • Faster to make and repair – fewer parts means less sewing, fewer places for things to loosen up, and easier servicing without taking half the gear apart.
  • Durable brass sand casting – handles repeated stress and daily use, whether you’re making halters for the stable, training, or sport.

Made for the side parts of a halter or anywhere you need solid webbing guidance plus a reliable attachment point, but don’t want (or need) the three-way pull of a 3-sided square. Just keep in mind it’s still a metal part. On ultra-delicate pony halters or minimalist designs, it can feel a bit bulkier than a simple slider.

Special Note

Before sewing, make sure your webbing fits the inner dimensions of the square exactly. You’ll find them listed as parameter “B” in the legend. That’s the only way your halter will hold as it should, and the webbing won’t get pinched in the corners.


TIP: Brass naturally oxidizes and darkens over time – it’s not a defect, just the metal reacting with air. You can restore its shine with #SITOL300G paste. To prevent darkening, apply the clear lacquer #637005/GLOSSY.

Product code B3690/20
Material Brass sand casting
Surface finish Polished
Weight 26 g

Workshop opinion

Pavla NovákováI put it on the workbench first. You get facts instead of guesses.

I fit the 2 Sided Halter Square in brass to leather halters in brown or havana, where the gold-tone metal turns an ordinary halter into one that catches the eye the moment it is on the horse. It is solid brass, not plated. What horse owners complain about most on forums are “brass” rings that rusted after one winter because there was steel under a thin coating.

Brass is a softer metal, though, and under a sudden hard pull it tends to bend rather than keep its shape. For a horse that likes to pull back when tied, I use the 2 Sided Halter Square in cast stainless steel instead. For the broad heads of draught horses there is the Heavy-Duty 2 Sided Halter Square in brass, which keeps the halter from looking as if it were borrowed from a pony.

Product variants and parameters
20 mm 6 mm 41 mm 40 mm
26 mm 7 mm 55 mm 54 mm
Dimensions may vary by ±10%

Enter a quantity to see the total price incl. 21% VAT

Total for 10 pcs 23.33 €
2.33 €/pc incl. 21% VAT

Added!

  • 10

    Base price from 10 pcs 2.33 €/pc

  • 20

    Package price from 20 pcs 1.33 €/pc 43% cheaper per piece

  • 500

    Carton price from 500 pcs 1.20 €/pc 49% cheaper per piece Lowest unit price

About us 37 years supplying hardware to makers and workshops, 103,325 customers so far.

Why buy from Pet Hardware®

We'll let you know when it's back

Enter your email and we'll send you one notification when this product is back in stock. Nothing more.

Often bought together