Eyelet ø 5.2 mm (1000 pcs) – Stainless Steel
Code:
SS E10x5.2
Availability:
In Stock 90 packs
Stainless eyelet with inside ø 5.2 mm, for reinforcing holes in leather or fabrics. The eyelets can be set using the #3990-00 press with #3992-E6x5.0 die. For setting by hand, we offer the #8101-E6x5.0 eyelet setter. The size of the piston or head setter must be selected according to the size of the eyelet. You can also find a suitable tool among the products recommended below. The correct tool for your eyelet size will be displayed. Washers for the eyelets "W" must be purchased separately. The quoted price is for the entire pack.
TIP: For hard and stiff, unyielding materials, the eyelet can be used without a washer. For other applications we recommend using a washer that would prevent the eyelet from getting torn out. The video below the picture will show you how to choose the correct size and how to attach the eyelet properly.
TIP: For hard and stiff, unyielding materials, the eyelet can be used without a washer. For other applications we recommend using a washer that would prevent the eyelet from getting torn out. The video below the picture will show you how to choose the correct size and how to attach the eyelet properly.
Material: Stainless steel (AISI 304)
Surface finish: Polished
Surface finish: Polished
Weight: 220 g
Blog post: How to rivet eyelets
We'll let you know when it's back
Enter your email and we'll send you one notification when this product is back in stock. Nothing more.
