Double Cap Rivet – Stainless Steel (AISI 304) (10 pcs)

Product code: 66 Z - SS
Double cap saddlery rivet with bite (a very useful notch near the tip of the stem) that will speed up the riveting process, primarily for belts, collars, and harnesses, and increase the strength of the join. Double cap rivets are used where both sides of the rivet will be visible, or where a rivet comes in contact with other surfaces (purse and other handles, leashes, collars, harnesses, …). The cap is made of stainless steel, the leg part is brass made with a nickel-plated finish. The price listed is for the entire package (10 pcs)!

To set using the #3990-00 hand press, use the #3997-66 Z die. For hand setting, the #8101-66 Z, #RS/7x100 setter is used. The size of piston or setter must be selected to match the size of the rivet. Or you can find the proper riveting tool among the products recommended below. The correct tool will be displayed for the rivet size that you choose.

How to choose the correct-length rivet?

Whether we work with leather, webbing or fabric, the thickness of the material is always the deciding factor. For the rivet to spread properly, choose one that is about 2–3 mm longer than the total thickness of the material. For rivet length see dimension "B" in the table.
Product code 66 Z - SS
Material Stainless steel (AISI 304)
Weight 3 g

Blog post: Riveting guide

Product variants and parameters
Out of stock 7 mm 3 mm 7 mm 10
Dimensions may vary by ±10%

This product is no longer available.
View alternatives
Why choose us Buy more, pay less. You see pack and carton prices and any order-value discount before paying.

Why buy from Pet Hardware®

We'll let you know when it's back

Enter your email and we'll send you one notification when this product is back in stock. Nothing more.

Frequently asked questions

Yes, the smallest quantity is one bag of rivets or 100 snaps. We don't offer smaller packs.

  • Rivets and Chicago screws are sold in bags. Most bags contain 100 pcs, bags of rhinestone rivets also 50 pcs, and bags of eyelets and cap rivets usually 1,000 pcs. Brass and stainless steel Chicago screws and some double cap rivets also come in bags of 10.

  • Snap fasteners and button studs are sold individually, from 100 pcs of one type.

The number of pieces per bag and the price per piece are shown on each product. We'll send you a sample to try. See Can I get a product sample?

The total thickness of the layers you're joining decides. Add the shank overhang needed for spreading: the shank should be 2–3 mm longer than the material thickness.

The shank length is listed on each rivet's product page in the variants table as dimension B. The full range is in the Rivets & Screws category.

The hole diameter differs by material. For leather, choose a punch slightly smaller than the shank diameter: leather is elastic and grips the shank tightly. For waterproof webbing, choose a punch that matches the shank exactly; the webbing doesn't stretch, so the shank has to pass through without being forced.

A shank that's too long shows up as a rivet that deforms while spreading, or caps that don't line up.

Often bought together