Double Cap Rivet – Stainless Steel (1000 pcs)
Code:
SS 66 Z
Availability:
In Stock 113 packs
Double cap saddlery rivet with bite (a very useful notch near the tip of the stem) that will speed up the riveting process, primarily for belts, collars and harnesses, and increase the strength of the join. Double cap rivets are used where both sides of the rivet will be visible, or where a rivet comes in contact with other surfaces (purse and other handles, leashes, collars, harnesses, …). The price listed is for the entire package (1000 pcs)!
For proper riveting, it is essential to choose the right tool both for creating the hole and for setting the rivet itself. For making the hole, we recommend punches #KEM/LSHP30 or #211700STP-6. For riveting using the hand press #3990-00, use dies #3997-20 Z. For manual riveting, tools #8101-20 Z or #RS/6x100 are suitable. The size of the die or setting tool must always be selected according to the rivet size. You can also find suitable riveting tools among the recommended products below. The correct tool will be displayed based on the rivet size you select.
How to chose the correct-length rivet?
Whether we work with leather, webbing or fabric, the thickness of the material is always the deciding factor. For a the rivet to spread properly, choose one that is about 2–3 mm longer than the total thickness of the material. For rivet length see dimension "B" in the table.
For proper riveting, it is essential to choose the right tool both for creating the hole and for setting the rivet itself. For making the hole, we recommend punches #KEM/LSHP30 or #211700STP-6. For riveting using the hand press #3990-00, use dies #3997-20 Z. For manual riveting, tools #8101-20 Z or #RS/6x100 are suitable. The size of the die or setting tool must always be selected according to the rivet size. You can also find suitable riveting tools among the recommended products below. The correct tool will be displayed based on the rivet size you select.
How to chose the correct-length rivet?
Whether we work with leather, webbing or fabric, the thickness of the material is always the deciding factor. For a the rivet to spread properly, choose one that is about 2–3 mm longer than the total thickness of the material. For rivet length see dimension "B" in the table.
Material: Stainless steel (AISI 304)
Surface finish: Not specified
Surface finish: Not specified
Weight: 420 g
Blog post: Double Cap Rivets
We'll let you know when it's back
Enter your email and we'll send you one notification when this product is back in stock. Nothing more.
