The perfect punch for notching out an area on your wallet interiors. This amazingly sharp punch makes custom wallet fabrication so much easier. This precision …
● Out of stock
$66.42 incl. VAT
Material
Price
Low
The most affordable option. When you need many pieces at a reasonable price, this is the right choice.
Strength
High
Resistant to strong and repeated pulling — even if the dog suddenly dashes after a cat. Holds shape under sustained and long-term load.
Corrosion resistance
None
Without surface treatment it will start to rust as soon as it comes into contact with moisture. Rust gradually compromises both function and appearance — surface protection is a necessity.
Water
Unsuitable
Water causes corrosion, swelling, mould or other damage. Must be dried immediately after wetting, and even then permanent deterioration is a risk.
| Weight | Medium | Weight is noticeable — more sensitive animals will notice it. For miniature and toy breeds, consider whether it is still comfortable. |
|---|---|---|
| Allergy risk | Depends on finish | The material itself will not cause allergy, but the surface finishes commonly applied to it may contain nickel or other allergens. What matters is which finish you choose. |
| Aging | Degrades | Without a protective surface finish it deteriorates functionally and visually over time. Manifests as colour loss, surface roughening or the formation of rust. |
| Maintenance | Regular maintenance | To keep the material in good condition and looking good, it needs regular attention — treating, oiling or impregnating. Neglect significantly shortens its lifespan. |
An alloy of iron and carbon – the most widely used metal in the world. It's strong and affordable, but rusts without protection, so our steel hardware always carries a surface finish: nickel, chrome, zinc, matte black and others.
The largest part of the metal range: buckles, rings, snap hooks, rivets and tools. Nothing has yet beaten steel's ratio of strength to price.
Suitability for damp conditions is decided by the finish, not the steel itself – check the details on the specific finish. For zero maintenance, choose stainless steel instead.
As long as the finish is intact, there's nothing to worry about. On heavily used products, check worn spots occasionally; wipe damp hardware dry.
Rust isn't just a cosmetic flaw – it spreads beneath the surface. That's why with steel it's worth paying for a proper finish, not a thicker piece of metal.
The perfect punch for notching out an area on your wallet interiors. This amazingly sharp punch makes custom wallet fabrication so much easier. This precision …
● Out of stock
$66.42 incl. VAT
Massive punch for easy creation of oval holes in leather, to accommodate the prong of a buckle. Extra sharp, with a long handle for a …
● In stock
from $53.23 incl. VAT
Hand-forged oblong punches used by professional bag and strap manufactures. A must for any project that requires a buckle.Erhältlich in 3 Größen 13–25 mm. Handgeschmiedet …
● In stock
from $17.29 incl. VAT
The Hand Press Die Round Tube Punch Adapter for press #3990-00 is a practical jig with brass anvil, designed to hold round tube punches #211700STP-6 …
● In stock
$54.45 incl. VAT
A practical attachment for the #3990-00 press, designed to hold the #211700STP-6 and #211700STP-8 punching dies. We developed it specifically for the dies we mainly …
● In stock
$34.61 incl. VAT
A practical adapter for the #3990-00 press, designed to securely hold the #211700STP-12 and #211700STP-14 punching dies. We developed it specifically for these punches, which …
● In stock
$34.61 incl. VAT
The practical anvil attachment for press #3990-00 is designed to hold hole punches #3231-00 and #3231-17. With this attachment, you’ll take your press to a …
● In stock
$69.91 incl. VAT
Hand press dies for glove snaps. This four-part die fits our hand press #3990-00. Heavy duty, long lasting die made of hardened steel.
● In stock
from $72.60 incl. VAT
Want to set your Magnetic Snaps perfectly—without stress or waste? These setting dies are exactly what you need. They let you install snaps into leather …
● In stock
from $14.52 incl. VAT
All of our hand made setting dies are designed to set the rivets we offer: 6, 7, 8, 10 and 12 mm Fits our Hand …
● In stock
from $59.90 incl. VAT
All of our hand made setting dies are designed to set the rivets we offer: 6, 7, 8, 10 and 12mm Fits our Hand Press …
● In stock
from $59.90 incl. VAT
All of our hand made setting dies are designed to set the rhinestone rivets we offer: #GRACIA 7, #GRACIA 6. Fits our Hand Press #3990-00.
● In stock
from $59.90 incl. VAT
All of our hand made setting dies are designed to set the rhinestone rivets we offer: #GRACIA Z7, #GRACIA Z6. Fits our Hand Press #3990-00. …
● In stock
from $15.89 incl. VAT
Material: steel, Number of sizes: 1, Weight: 28 g, Minimum order: 1, Price per piece
● In stock
$9.30 incl. VAT
Material: steel, Number of sizes: 1, Weight: 46 g, Minimum order: 1, Price per piece
● In stock
$9.30 incl. VAT
Material: steel, Number of sizes: 7, Weight: 38 g, Minimum order: 1, Price per piece
● In stock
from $1.072 incl. VAT
Material: steel, Number of sizes: 6, Weight: 199 g, Minimum order: 1, Price per piece
● In stock
from $35.39 incl. VAT
Material: steel, Number of sizes: 6, Weight: 199 g, Minimum order: 1, Price per piece
● In stock
from $35.39 incl. VAT
Material: steel, Number of sizes: 1, Weight: 38 g, Minimum order: 1, Price per piece
● In stock
$10.55 incl. VAT
Material: steel, Number of sizes: 1, Weight: 38 g, Minimum order: 1, Price per piece
● In stock
$10.55 incl. VAT
Material: steel, Number of sizes: 1, Weight: 55 g, Minimum order: 1, Price per piece
● In stock
$5.31 incl. VAT
Material: steel, Number of sizes: 3, Weight: 46 g, Minimum order: 1, Price per piece
● In stock
from $9.54 incl. VAT
Material: steel, Number of sizes: 3, Weight: 46 g, Minimum order: 1, Price per piece
● In stock
from $72.60 incl. VAT
Material: steel, Number of sizes: 2, Weight: 46 g, Minimum order: 1, Price per piece
● In stock
from $55.66 incl. VAT
Material: steel, Number of sizes: 1, Weight: 200 g, Minimum order: 1, Price per piece
● In stock
$10.59 incl. VAT
Material: steel, Number of sizes: 3, Weight: 130 g, Minimum order: 1, Price per piece
● In stock
from $6.05 incl. VAT
Material: steel, Number of sizes: 1, Weight: 910 g, Minimum order: 1, Price per piece
● In stock
$17.29 incl. VAT
ø: 13 mm, Weight: 2 g, Material: steel, 24 pcs/pack, Price per pcs
● In stock
$0.102 incl. VAT
ø: 13 mm, Weight: 2 g, Material: steel, 24 pcs/pack, Price per pcs
● In stock
$0.102 incl. VAT
ø: 13 mm, Weight: 2 g, Material: steel, 24 pcs/pack, Price per pcs
● In stock
$0.076 incl. VAT