Eye width: 20–25 mm, Sizes: 2, Material: Zinc Die Casting, Breaking load: up to 200 kg, 10 pcs/pack, Price per pcs
● In stock
from $1.35 incl. VAT
Zinc die casting
Material
-
Price
Low
The most affordable option. When you need many pieces at a reasonable price, this is the right choice.
-
Strength
Medium
Handles everyday walks and regular use. Sufficient for calm and moderately active dogs, but may deform under repeated strong pulling.
-
Corrosion resistance
Limited
Holds up fine in dry conditions, but starts to oxidise or change surface gradually with repeated moisture contact. Not suitable for permanently wet environments without protection.
-
Water
Fresh water
Tolerates occasional contact with fresh water — rain, puddles, brief immersion. Better to dry after being in water, otherwise it may degrade over time.
| Weight | Medium | Weight is noticeable — more sensitive animals will notice it. For miniature and toy breeds, consider whether it is still comfortable. |
|---|---|---|
| Allergy risk | Depends on finish | The material itself will not cause allergy, but the surface finishes commonly applied to it may contain nickel or other allergens. What matters is which finish you choose. |
| Aging | Degrades | Without a protective surface finish it deteriorates functionally and visually over time. Manifests as colour loss, surface roughening or the formation of rust. |
| Maintenance | Regular maintenance | To keep the material in good condition and looking good, it needs regular attention — treating, oiling or impregnating. Neglect significantly shortens its lifespan. |
What zinc alloy is
A zinc alloy that is die-cast – the same family as Zamak. The most widely used material in our hardware: over a thousand products.
Why we use it for hardware
Die casting produces complex shapes with a smooth surface at a reasonable price. Snap hooks, side release buckles, buckles and keepers – all available in finishes from nickel through antique brass to rainbow neo-chrome.
When to choose it and when to look elsewhere
- Colour-matched collections – the same shape in many finishes.
- Good balance of price and looks.
Resistance to damp and suitability for allergy sufferers depend on the finish chosen – check its page. For extreme pulling force, choose steel or stainless steel instead; for the sea, bronze.
How it ages and how to care for it
Unchanged as long as the finish stays intact; wipe hardware dry and skip long soaking.
Good to know
Zinc casting can even reproduce fine relief detail – which is why our buckles have sharp lines and crisp logos.
Products — Material: Zinc die casting
-
Spring snap Deluxe with Safety Lock 83 mm/20–25Q – Black
Eye width: 20–25 mm, Sizes: 2, Material: Zinc Die Casting, Breaking load: up to 200 kg, 10 pcs/pack, Price per pcs
● In stock
from $1.42 incl. VAT
-
Spring snap Deluxe 89 mm/13–20 – Chrome Plated
Eye width: 13–20 mm, Sizes: 3, Material: Zinc Die Casting, Breaking load: up to 300 kg, 10 pcs/pack, Price per pcs
● In stock
from $1.101 incl. VAT
-
Spring snap Deluxe 86 mm/13 – Black
Eye width: 13 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 300 kg, 10 pcs/pack, Price per pcs
● In stock
$1.053 incl. VAT
-
Spring snap Deluxe 82 mm/16–26 – Nickel Plated
Eye width: 16–26 mm, Sizes: 2, Material: Zinc Die Casting, Breaking load: up to 190 kg, 10 pcs/pack, Price per pcs
● In stock
from $0.786 incl. VAT
-
Haberdashery snap 51 mm/25–30 – Brass Plated
Eye width: 25–30 mm, Sizes: 2, Material: Zinc Die Casting, Breaking load: up to 60 kg, 10 pcs/pack, Price per pcs
● In stock
from $0.551 incl. VAT
-
Haberdashery snap 50 mm/30Q – Chrome Plated
Eye width: 30 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 30 kg, 10 pcs/pack, Price per pcs
● In stock
$0.479 incl. VAT
-
Scissor snap hook 12 cm/20 – Nickel Plated
Eye width: 20 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 80 kg, 10 pcs/pack, Price per pcs
● In stock
$1.78 incl. VAT
-
Double Ended Bolt Snap 88 mm/10 – Chrome Plated
Eye width: 10 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 200 kg, 10 pcs/pack, Price per pcs
● In stock
$1.076 incl. VAT
-
Scissor snap hook 60 mm/8–18 – Chrome Plated
Eye width: 8–18 mm, Sizes: 4, Material: Zinc Die Casting, Breaking load: up to 120 kg, 10 pcs/pack, Price per pcs
● In stock
from $0.762 incl. VAT
-
Lever Snap 45 mm/23Q – Black
Eye width: 23 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 95 kg, 10 pcs/pack, Price per pcs
● In stock
$0.558 incl. VAT
-
Lever Snap 45 mm/23Q – Nickel Plated
Eye width: 23 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 95 kg, 10 pcs/pack, Price per pcs
● In stock
$0.509 incl. VAT
-
Snap hook 53 mm/16 – Chrome Plated
Eye width: 16 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 2 kg, 10 pcs/pack, Price per pcs
● In stock
$0.174 incl. VAT
-
Snap hook 70 mm/9 – Chrome Plated
Eye width: 9 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 2 kg, 10 pcs/pack, Price per pcs
● In stock
$0.300 incl. VAT
-
Snap hook 66 mm/8 – Chrome Plated
Eye width: 8 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 2 kg, 10 pcs/pack, Price per pcs
● In stock
$0.229 incl. VAT
-
Center bar roller buckle
This center bar roller buckle is very well made, with all edges smoothly finished. Tongue and roller are made of steel, the frame is die …
● In stock
from $0.339 incl. VAT
-
Center bar buckle – Black
Looking for a reliable solution that combines a classic look with modern practicality? The roller buckle holds tight, is easy to adjust, and looks great …
● In stock
from $0.242 incl. VAT
-
Center bar buckle
Center bar buckle , zinc die cast, chome plated. Ideal for your leathercrafts projects.
● In stock
from $0.248 incl. VAT
-
Double Bar Collar Buckle – Nickel Plated, 10–50 mm
Inner width: 10–50 mm, Sizes: 10, Material: zinc die casting, 10 pcs/pack, Price per pcs
● In stock
from $0.169 incl. VAT
-
Double Bar Collar Buckle – Rose Gold, 10–40 mm
Inner width: 10–40 mm, Sizes: 8, Material: zinc die casting, 10 pcs/pack, Price per pcs
● In stock
from $0.322 incl. VAT
-
Double Bar Collar Buckle – Neo-Chrome
Inner width: 16–25 mm, Sizes: 3, Material: zinc die casting, 10 pcs/pack, Price per pcs
● In stock
from $1.21 incl. VAT
-
Double Bar Collar Buckle – Black, 10–50 mm
Inner width: 10–50 mm, Sizes: 10, Material: zinc die casting, 10 pcs/pack, Price per pcs
● In stock
from $0.200 incl. VAT
-
Double Bar Collar Buckle – Antique Brass
Inner width: 10–50 mm, Sizes: 7, Material: zinc die casting, 10 pcs/pack, Price per pcs
● In stock
from $0.290 incl. VAT
-
Double Bar Collar Buckle – Nickel Plated, 20–25 mm
Inner width: 20–25 mm, Sizes: 2, Material: zinc die casting, 10 pcs/pack, Price per pcs
● In stock
from $0.496 incl. VAT
-
Double Bar Collar Buckle – Black, 20–25 mm
Inner width: 20–25 mm, Sizes: 2, Material: zinc die casting, 10 pcs/pack, Price per pcs
● In stock
from $0.593 incl. VAT
-
Collar Buckle – Nickel Plated, 16–30 mm
Inner width: 16–30 mm, Sizes: 4, Material: zinc die casting, 10 pcs/pack, Price per pcs
● In stock
from $0.369 incl. VAT
-
Collar Buckle – Rose Gold, 16–30 mm
Inner width: 16–30 mm, Sizes: 4, Material: zinc die casting, 10 pcs/pack, Price per pcs
● In stock
from $0.457 incl. VAT
-
Collar Buckle – Neo-Chrome
Inner width: 16–30 mm, Sizes: 4, Material: zinc die casting, 10 pcs/pack, Price per pcs
● In stock
from $0.928 incl. VAT
-
Double Bar Collar Buckle – Gold Plated
Inner width: 10–40 mm, Sizes: 6, Material: zinc die casting, 10 pcs/pack, Price per pcs
● Out of stock
from $0.496 incl. VAT
-
Belt buckle 15 mm – Gold Plated
Inner width: 15 mm, Prong Ø: 3.2 mm, Material: zinc die casting, Weight: 10 g, 10 pcs/pack, Price per pcs
● In stock
$0.762 incl. VAT
-
Rhinestone Buckle
Inner width: 13 mm, Sizes: 1, Material: zinc die casting, 10 pcs/pack, Price per pcs
● In stock
$0.534 incl. VAT
-
Belt buckle 20 mm – Gold Plated
Inner width: 20 mm, Prong Ø: 3.5 mm, Material: zinc die casting, Weight: 12 g, 10 pcs/pack, Price per pcs
● In stock
$0.738 incl. VAT
-
Belt buckle 30 mm – Antique Silver
Inner width: 30 mm, Prong Ø: 3.8 mm, Material: zinc die casting, Weight: 17 g, 10 pcs/pack, Price per pcs
● In stock
$0.721 incl. VAT
-
Belt buckle 35 mm – Antique Silver
Inner width: 35 mm, Prong Ø: 4 mm, Material: zinc die casting, Weight: 27 g, 10 pcs/pack, Price per pcs
● In stock
$0.681 incl. VAT
-
Belt buckle 40 mm – Antique Silver
Inner width: 40 mm, Prong Ø: 3.8 mm, Material: zinc die casting, Weight: 40 g, 10 pcs/pack, Price per pcs
● In stock
$1.21 incl. VAT
-
Belt buckle 40 mm – Antique Silver
Inner width: 40 mm, Prong Ø: 4 mm, Material: zinc die casting, Weight: 42 g, 10 pcs/pack, Price per pcs
● In stock
$1.28 incl. VAT
