Inner width: 25 mm, Prong Ø: 4 mm, Material: zinc die casting, Weight: 11 g, 10 pcs/pack, Price per pcs
● In stock
$0.381 incl. VAT
Zinc die casting
Material
-
Price
Low
The most affordable option. When you need many pieces at a reasonable price, this is the right choice.
-
Strength
Medium
Handles everyday walks and regular use. Sufficient for calm and moderately active dogs, but may deform under repeated strong pulling.
-
Corrosion resistance
Limited
Holds up fine in dry conditions, but starts to oxidise or change surface gradually with repeated moisture contact. Not suitable for permanently wet environments without protection.
-
Water
Fresh water
Tolerates occasional contact with fresh water — rain, puddles, brief immersion. Better to dry after being in water, otherwise it may degrade over time.
| Weight | Medium | Weight is noticeable — more sensitive animals will notice it. For miniature and toy breeds, consider whether it is still comfortable. |
|---|---|---|
| Allergy risk | Depends on finish | The material itself will not cause allergy, but the surface finishes commonly applied to it may contain nickel or other allergens. What matters is which finish you choose. |
| Aging | Degrades | Without a protective surface finish it deteriorates functionally and visually over time. Manifests as colour loss, surface roughening or the formation of rust. |
| Maintenance | Regular maintenance | To keep the material in good condition and looking good, it needs regular attention — treating, oiling or impregnating. Neglect significantly shortens its lifespan. |
What zinc alloy is
A zinc alloy that is die-cast – the same family as Zamak. The most widely used material in our hardware: over a thousand products.
Why we use it for hardware
Die casting produces complex shapes with a smooth surface at a reasonable price. Snap hooks, side release buckles, buckles and keepers – all available in finishes from nickel through antique brass to rainbow neo-chrome.
When to choose it and when to look elsewhere
- Colour-matched collections – the same shape in many finishes.
- Good balance of price and looks.
Resistance to damp and suitability for allergy sufferers depend on the finish chosen – check its page. For extreme pulling force, choose steel or stainless steel instead; for the sea, bronze.
How it ages and how to care for it
Unchanged as long as the finish stays intact; wipe hardware dry and skip long soaking.
Good to know
Zinc casting can even reproduce fine relief detail – which is why our buckles have sharp lines and crisp logos.
Products — Material: Zinc die casting
-
Belt buckle 29 mm – Chrome Plated
Inner width: 29 mm, Prong Ø: 4 mm, Material: zinc die casting, Weight: 16 g, 10 pcs/pack, Price per pcs
● In stock
$0.640 incl. VAT
-
Belt buckle 30 mm – Chrome Plated
Inner width: 30 mm, Prong Ø: 3.3 mm, Material: zinc die casting, Weight: 11 g, 10 pcs/pack, Price per pcs
● In stock
$0.518 incl. VAT
-
Belt buckle 35 mm – Chrome Plated
Inner width: 35 mm, Prong Ø: 4 mm, Material: zinc die casting, Weight: 27 g, 10 pcs/pack, Price per pcs
● In stock
$0.681 incl. VAT
-
Belt buckle 40 mm – Chrome Plated
Inner width: 40 mm, Prong Ø: 4.2 mm, Material: zinc die casting, Weight: 41 g, 10 pcs/pack, Price per pcs
● In stock
$1.17 incl. VAT
-
Belt buckle 40 mm – Chrome Plated
Inner width: 40 mm, Prong Ø: 4 mm, Material: zinc die casting, Weight: 42 g, 10 pcs/pack, Price per pcs
● In stock
$1.28 incl. VAT
-
Belt buckle with keeper 30 mm – Brushed
Inner width: 30 mm, Prong Ø: 4.2 mm, Material: zinc die casting, Weight: 50 g, 10 pcs/pack, Price per pcs
● In stock
$2.07 incl. VAT
-
Belt buckle with keeper 30 mm – Brushed Nickel
Inner width: 30 mm, Prong Ø: 4 mm, Material: zinc die casting, Weight: 60 g, 10 pcs/pack, Price per pcs
● In stock
$3.88 incl. VAT
-
Belt buckle with keeper 30 mm – Antique Silver
Inner width: 30 mm, Prong Ø: 4 mm, Material: zinc die casting, Weight: 50 g, 10 pcs/pack, Price per pcs
● In stock
$1.34 incl. VAT
-
Belt buckle 30 mm – all metal
Inner width: 30 mm, Prong Ø: 4.6 mm, Material: zinc die casting, Weight: 49 g, 10 pcs/pack, Price per pcs
● In stock
$3.58 incl. VAT
-
Belt buckle 30 mm – all metal
Inner width: 30 mm, Prong Ø: 4.6 mm, Material: zinc die casting, Weight: 49 g, 10 pcs/pack, Price per pcs
● In stock
$3.62 incl. VAT
-
Belt buckle 35 mm – all metal
Inner width: 35 mm, Prong Ø: 4.5 mm, Material: zinc die casting, Weight: 58 g, 10 pcs/pack, Price per pcs
● In stock
$2.21 incl. VAT
-
Belt buckle 30 mm – all metal
Inner width: 30 mm, Prong Ø: 4.6 mm, Material: zinc die casting, Weight: 47 g, 10 pcs/pack, Price per pcs
● In stock
$2.89 incl. VAT
-
Belt buckle 30 mm – Chrome Plated
Inner width: 30 mm, Prong Ø: 3.8 mm, Material: zinc die casting, Weight: 47 g, 1 pcs/pack, Price per pcs
● In stock
$2.14 incl. VAT
-
Belt buckle 30 mm – Gold Plated
Inner width: 30 mm, Prong Ø: 3.8 mm, Material: zinc die casting, Weight: 47 g, 1 pcs/pack, Price per pcs
● In stock
$2.67 incl. VAT
-
Belt buckle 30 mm
Inner width: 30 mm, Prong Ø: 4.2 mm, Material: zinc die casting, Weight: 48 g, 10 pcs/pack, Price per pcs
● In stock
$1.74 incl. VAT
-
Belt buckle 30 mm
Inner width: 30 mm, Prong Ø: 4.2 mm, Material: zinc die casting, Weight: 48 g, 10 pcs/pack, Price per pcs
● In stock
$1.74 incl. VAT
-
Belt buckle 30 mm
Inner width: 30 mm, Prong Ø: 4.2 mm, Material: zinc die casting, Weight: 54 g, 10 pcs/pack, Price per pcs
● In stock
$1.74 incl. VAT
-
Belt buckle 30 mm
Inner width: 30 mm, Prong Ø: 4.2 mm, Material: zinc die casting, Weight: 55 g, 10 pcs/pack, Price per pcs
● In stock
$1.74 incl. VAT
-
Automatic Belt Buckle 35 mm – Brushed Nickel
Inner width: 35 mm, Prong Ø: 0 mm, Material: zinc die casting, Weight: 88 g, 1 pcs/pack, Price per pcs
● Out of stock
$4.30 incl. VAT
-
Automatic Belt Buckle 35 mm – Brushed Gun Metal
Inner width: 35 mm, Prong Ø: 0 mm, Material: zinc die casting, Weight: 88 g, 1 pcs/pack, Price per pcs
● In stock
$4.36 incl. VAT
-
Heavy belt buckle 40 mm
Inner width: 40 mm, Prong Ø: 5.2 mm, Material: zinc die casting, Weight: 51 g, 10 pcs/pack, Price per pcs
● In stock
$1.88 incl. VAT
-
Belt buckle 40 mm
Inner width: 40 mm, Prong Ø: 5.2 mm, Material: zinc die casting, Weight: 58 g, 10 pcs/pack, Price per pcs
● In stock
$1.88 incl. VAT
-
Belt buckle 40 mm
Inner width: 40 mm, Prong Ø: 4.4 mm, Material: zinc die casting, Weight: 37 g, 10 pcs/pack, Price per pcs
● In stock
$1.55 incl. VAT
-
Hunting belt buckle 40 mm
Inner width: 40 mm, Prong Ø: 4 mm, Material: zinc die casting, Weight: 48 g, 10 pcs/pack, Price per pcs
● In stock
$1.88 incl. VAT
-
Belt buckle 40 mm – Antique Silver
Inner width: 40 mm, Prong Ø: 4.2 mm, Material: zinc die casting, Weight: 42 g, 10 pcs/pack, Price per pcs
● In stock
$1.85 incl. VAT
-
Belt buckle 39 mm – Antique Silver
Inner width: 39 mm, Prong Ø: 3.8 mm, Material: zinc die casting, Weight: 38 g, 10 pcs/pack, Price per pcs
● In stock
$1.80 incl. VAT
-
Belt buckle 30 mm – Antique Silver
Inner width: 30 mm, Prong Ø: 3.8 mm, Material: zinc die casting, Weight: 30 g, 10 pcs/pack, Price per pcs
● In stock
$1.55 incl. VAT
-
Belt buckle 39 mm – Antique Silver
Inner width: 39 mm, Prong Ø: 4 mm, Material: zinc die casting, Weight: 45 g, 10 pcs/pack, Price per pcs
● In stock
$1.90 incl. VAT
-
Belt buckle 30 mm – Antique Silver
Inner width: 30 mm, Prong Ø: 3.8 mm, Material: zinc die casting, Weight: 28 g, 10 pcs/pack, Price per pcs
● In stock
$1.60 incl. VAT
-
Small belt buckle 20 mm
Inner width: 20 mm, Prong Ø: 4.7 mm, Material: zinc die casting, Weight: 12 g, 50 pcs/pack, Price per pcs
● In stock
$0.627 incl. VAT
-
Hunting belt buckle 40 mm
Inner width: 40 mm, Prong Ø: 4 mm, Material: zinc die casting, Weight: 48 g, 10 pcs/pack, Price per pcs
● In stock
$1.85 incl. VAT
-
Belt buckle 38 mm
Inner width: 38 mm, Prong Ø: 4 mm, Material: zinc die casting, Weight: 49 g, 10 pcs/pack, Price per pcs
● In stock
$2.07 incl. VAT
-
Belt buckle 35 mm – Antique Silver
Inner width: 35 mm, Prong Ø: 3.8 mm, Material: zinc die casting, Weight: 24 g, 10 pcs/pack, Price per pcs
● In stock
$1.21 incl. VAT
-
Belt buckle 15 mm – Nickel Plated
Inner width: 15 mm, Prong Ø: 3.2 mm, Material: zinc die casting, Weight: 13 g, 10 pcs/pack, Price per pcs
● In stock
$0.714 incl. VAT
-
Belt buckle 20 mm – Nickel Plated
Inner width: 20 mm, Prong Ø: 3.5 mm, Material: zinc die casting, Weight: 12 g, 10 pcs/pack, Price per pcs
● In stock
$0.690 incl. VAT
