Width: 16–51 mm, Sizes: 6, Material: zinc die casting, Breaking load: up to 250 kg, 10 pcs/pack, Price per pcs
● In stock
from $1.14 incl. VAT
Material
Price
Low
The most affordable option. When you need many pieces at a reasonable price, this is the right choice.
Strength
Medium
Handles everyday walks and regular use. Sufficient for calm and moderately active dogs, but may deform under repeated strong pulling.
Corrosion resistance
Limited
Holds up fine in dry conditions, but starts to oxidise or change surface gradually with repeated moisture contact. Not suitable for permanently wet environments without protection.
Water
Fresh water
Tolerates occasional contact with fresh water — rain, puddles, brief immersion. Better to dry after being in water, otherwise it may degrade over time.
| Weight | Medium | Weight is noticeable — more sensitive animals will notice it. For miniature and toy breeds, consider whether it is still comfortable. |
|---|---|---|
| Allergy risk | Depends on finish | The material itself will not cause allergy, but the surface finishes commonly applied to it may contain nickel or other allergens. What matters is which finish you choose. |
| Aging | Degrades | Without a protective surface finish it deteriorates functionally and visually over time. Manifests as colour loss, surface roughening or the formation of rust. |
| Maintenance | Regular maintenance | To keep the material in good condition and looking good, it needs regular attention — treating, oiling or impregnating. Neglect significantly shortens its lifespan. |
A zinc alloy that is die-cast – the same family as Zamak. The most widely used material in our hardware: over a thousand products.
Die casting produces complex shapes with a smooth surface at a reasonable price. Snap hooks, side release buckles, buckles and keepers – all available in finishes from nickel through antique brass to rainbow neo-chrome.
Resistance to damp and suitability for allergy sufferers depend on the finish chosen – check its page. For extreme pulling force, choose steel or stainless steel instead; for the sea, bronze.
Unchanged as long as the finish stays intact; wipe hardware dry and skip long soaking.
Zinc casting can even reproduce fine relief detail – which is why our buckles have sharp lines and crisp logos.
Width: 16–51 mm, Sizes: 6, Material: zinc die casting, Breaking load: up to 250 kg, 10 pcs/pack, Price per pcs
● In stock
from $1.14 incl. VAT
Width: 10–50 mm, Sizes: 8, Material: zinc die casting, Breaking load: up to 250 kg, 10 pcs/pack, Price per pcs
● In stock
from $1.13 incl. VAT
Width: 10–50 mm, Sizes: 7, Material: zinc die casting, Breaking load: up to 250 kg, 10 pcs/pack, Price per pcs
● In stock
from $1.17 incl. VAT
Width: 10–50 mm, Sizes: 7, Material: zinc die casting, Breaking load: up to 250 kg, 10 pcs/pack, Price per pcs
● In stock
from $1.17 incl. VAT
Width: 10–38 mm, Sizes: 6, Material: zinc die casting, Breaking load: up to 200 kg, 10 pcs/pack, Price per pcs
● In stock
from $1.17 incl. VAT
Width: 16–25 mm, Sizes: 3, Material: zinc die casting, Breaking load: up to 200 kg, 10 pcs/pack, Price per pcs
● In stock
from $0.922 incl. VAT
Width: 16–38 mm, Sizes: 5, Material: zinc die casting, Breaking load: up to 200 kg, 10 pcs/pack, Price per pcs
● In stock
from $2.33 incl. VAT
Width: 16–25 mm, Sizes: 3, Material: zinc die casting, Breaking load: up to 272 kg, 10 pcs/pack, Price per pcs
● In stock
from $2.42 incl. VAT
Width: 16–25 mm, Sizes: 3, Material: zinc die casting, Breaking load: up to 272 kg, 10 pcs/pack, Price per pcs
● In stock
from $2.06 incl. VAT
Width: 16–25 mm, Sizes: 3, Material: zinc die casting, Breaking load: up to 272 kg, 10 pcs/pack, Price per pcs
● In stock
from $2.42 incl. VAT
Width: 16–25 mm, Sizes: 3, Material: zinc die casting, Breaking load: up to 200 kg, 10 pcs/pack, Price per pcs
● In stock
from $0.762 incl. VAT
Width: 10–38 mm, Sizes: 6, Material: zinc die casting, Breaking load: up to 230 kg, 10 pcs/pack, Price per pcs
● Out of stock
from $1.33 incl. VAT
Inner width: 40 mm, Sizes: 1, Material: zinc die casting, 10 pcs/pack, Price per pcs
● In stock
$0.708 incl. VAT
Inner width: 30–40 mm, Sizes: 3, Material: zinc die casting, 10 pcs/pack, Price per pcs
● In stock
from $0.629 incl. VAT
Inner Ø: 4 mm, Sizes: 1, Material: zinc die casting, 10 pcs/pack, Price per pcs
● In stock
$0.105 incl. VAT
Inner Ø: 5 mm, Sizes: 1, Material: zinc die casting, 10 pcs/pack, Price per pcs
● In stock
$0.160 incl. VAT
Inner Ø: 6 mm, Sizes: 1, Material: zinc die casting, 10 pcs/pack, Price per pcs
● In stock
$0.174 incl. VAT
Inner Ø: 8 mm, Sizes: 1, Material: zinc die casting, 10 pcs/pack, Price per pcs
● In stock
$0.270 incl. VAT
Inner Ø: 10 mm, Sizes: 1, Material: zinc die casting, 10 pcs/pack, Price per pcs
● In stock
$0.776 incl. VAT
Inner Ø: 10 mm, Sizes: 1, Material: zinc die casting, 10 pcs/pack, Price per pcs
● Out of stock
$0.266 incl. VAT
Inner Ø: 10 mm, Sizes: 1, Material: zinc die casting, 10 pcs/pack, Price per pcs
● Out of stock
$0.330 incl. VAT
Inner Ø: 14 mm, Sizes: 1, Material: zinc die casting, 10 pcs/pack, Price per pcs
● In stock
$0.496 incl. VAT
Inner Ø: 14 mm, Sizes: 1, Material: zinc die casting, 10 pcs/pack, Price per pcs
● Out of stock
$0.776 incl. VAT
Inner Ø: 17 mm, Sizes: 1, Material: zinc die casting, 10 pcs/pack, Price per pcs
● In stock
$0.743 incl. VAT
Inner Ø: 20 mm, Sizes: 1, Material: zinc die casting, 10 pcs/pack, Price per pcs
● In stock
$0.820 incl. VAT
Inner Ø: 17 mm, Sizes: 1, Material: zinc die casting, 10 pcs/pack, Price per pcs
● In stock
$0.915 incl. VAT
Inner Ø: 20 mm, Sizes: 1, Material: zinc die casting, 10 pcs/pack, Price per pcs
● In stock
$0.943 incl. VAT
Inner Ø: 25 mm, Sizes: 1, Material: zinc die casting, 10 pcs/pack, Price per pcs
● In stock
$0.943 incl. VAT
Inner Ø: 13 mm, Sizes: 1, Material: zinc die casting, 10 pcs/pack, Price per pcs
● In stock
$0.635 incl. VAT
Inner Ø: 20 mm, Sizes: 1, Material: zinc die casting, 10 pcs/pack, Price per pcs
● In stock
$0.762 incl. VAT
Inner Ø: 22 mm, Sizes: 1, Material: zinc die casting, Breaking load: up to 35 kg,10 pcs/pack, Price per pcs
● In stock
$1.089 incl. VAT
High quality three-part clasp, used most often in making a purse, case, bag, or a larger wallet. A metal clasp signals the perfection of you …
● In stock
$0.750 incl. VAT
Attaches to the top flap by a small metal plate and flexible cradle. The opposite part attaches to the fabric or leather with two small …
● In stock
from $1.52 incl. VAT
Attaches to the top flap by a small metal plate and flexible cradle. The opposite part attaches to the fabric or leather with two small …
● In stock
$1.053 incl. VAT
High quality three-part clasp, used most often in making a purse, case, bag, or a larger wallet. A metal clasp signals the perfection of you …
● In stock
$0.666 incl. VAT
Attaches to the top flap by a small metal plate and flexible cradle. The opposite part attaches to the fabric or leather with two small …
● In stock
from $1.44 incl. VAT