Eye width: 28 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 340 kg, 10 pcs/pack, Price per pcs
● In stock
$1.82 incl. VAT
Material
Price
Low
The most affordable option. When you need many pieces at a reasonable price, this is the right choice.
Strength
Medium
Handles everyday walks and regular use. Sufficient for calm and moderately active dogs, but may deform under repeated strong pulling.
Corrosion resistance
Limited
Holds up fine in dry conditions, but starts to oxidise or change surface gradually with repeated moisture contact. Not suitable for permanently wet environments without protection.
Water
Fresh water
Tolerates occasional contact with fresh water — rain, puddles, brief immersion. Better to dry after being in water, otherwise it may degrade over time.
| Weight | Medium | Weight is noticeable — more sensitive animals will notice it. For miniature and toy breeds, consider whether it is still comfortable. |
|---|---|---|
| Allergy risk | Depends on finish | The material itself will not cause allergy, but the surface finishes commonly applied to it may contain nickel or other allergens. What matters is which finish you choose. |
| Aging | Degrades | Without a protective surface finish it deteriorates functionally and visually over time. Manifests as colour loss, surface roughening or the formation of rust. |
| Maintenance | Regular maintenance | To keep the material in good condition and looking good, it needs regular attention — treating, oiling or impregnating. Neglect significantly shortens its lifespan. |
A zinc alloy that is die-cast – the same family as Zamak. The most widely used material in our hardware: over a thousand products.
Die casting produces complex shapes with a smooth surface at a reasonable price. Snap hooks, side release buckles, buckles and keepers – all available in finishes from nickel through antique brass to rainbow neo-chrome.
Resistance to damp and suitability for allergy sufferers depend on the finish chosen – check its page. For extreme pulling force, choose steel or stainless steel instead; for the sea, bronze.
Unchanged as long as the finish stays intact; wipe hardware dry and skip long soaking.
Zinc casting can even reproduce fine relief detail – which is why our buckles have sharp lines and crisp logos.
Eye width: 28 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 340 kg, 10 pcs/pack, Price per pcs
● In stock
$1.82 incl. VAT
Eye width: 20–40 mm, Sizes: 5, Material: Zinc Die Casting, Breaking load: up to 260 kg, 10 pcs/pack, Price per pcs
● In stock
from $1.089 incl. VAT
Eye width: 25 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 260 kg, 10 pcs/pack, Price per pcs
● In stock
$1.089 incl. VAT
Eye width: 13–20 mm, Sizes: 3, Material: Zinc Die Casting, Breaking load: up to 300 kg, 10 pcs/pack, Price per pcs
● In stock
from $1.016 incl. VAT
Eye width: 20–25 mm, Sizes: 2, Material: Zinc Die Casting, Breaking load: up to 230 kg, 10 pcs/pack, Price per pcs
● In stock
from $1.18 incl. VAT
Eye width: 28 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 340 kg, 10 pcs/pack, Price per pcs
● In stock
$1.82 incl. VAT
Eye width: 17–20 mm, Sizes: 2, Material: Zinc Die Casting, Breaking load: up to 230 kg, 10 pcs/pack, Price per pcs
● In stock
from $1.22 incl. VAT
Eye width: 20–25 mm, Sizes: 2, Material: Zinc Die Casting, Breaking load: up to 260 kg, 10 pcs/pack, Price per pcs
● In stock
from $1.26 incl. VAT
Eye width: 17–20 mm, Sizes: 2, Material: Zinc Die Casting, Breaking load: up to 230 kg, 10 pcs/pack, Price per pcs
● In stock
from $2.62 incl. VAT
Eye width: 20–25 mm, Sizes: 2, Material: Zinc Die Casting, Breaking load: up to 260 kg, 10 pcs/pack, Price per pcs
● In stock
from $2.96 incl. VAT
Eye width: 17 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 338 kg, 10 pcs/pack, Price per pcs
● In stock
$1.021 incl. VAT
Eye width: 20–25 mm, Sizes: 2, Material: Zinc Die Casting, Breaking load: up to 260 kg, 10 pcs/pack, Price per pcs
● In stock
from $1.106 incl. VAT
Eye width: 20 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 260 kg, 10 pcs/pack, Price per pcs
● In stock
$1.053 incl. VAT
Eye width: 20–25 mm, Sizes: 2, Material: Zinc Die Casting, Breaking load: up to 230 kg, 10 pcs/pack, Price per pcs
● Out of stock
from $1.44 incl. VAT
Eye width: 6 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 60 kg, 10 pcs/pack, Price per pcs
● In stock
$0.422 incl. VAT
Eye width: 10 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 35 kg, 10 pcs/pack, Price per pcs
● In stock
$0.313 incl. VAT
Eye width: 8–10 mm, Sizes: 2, Material: Zinc Die Casting, Breaking load: up to 115 kg, 10 pcs/pack, Price per pcs
● In stock
from $0.409 incl. VAT
Eye width: 10 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 115 kg, 10 pcs/pack, Price per pcs
● In stock
$0.335 incl. VAT
Eye width: 10–13 mm, Sizes: 2, Material: Zinc Die Casting, Breaking load: up to 200 kg, 10 pcs/pack, Price per pcs
● In stock
from $0.536 incl. VAT
Eye width: 17–25 mm, Sizes: 3, Material: Zinc Die Casting, Breaking load: up to 30 kg, 10 pcs/pack, Price per pcs
● In stock
from $0.313 incl. VAT
Eye width: 13 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 100 kg, 10 pcs/pack, Price per pcs
● In stock
$0.409 incl. VAT
Eye width: 13 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 200 kg, 10 pcs/pack, Price per pcs
● In stock
$0.536 incl. VAT
Eye width: 17–25 mm, Sizes: 3, Material: Zinc Die Casting, Breaking load: up to 30 kg, 10 pcs/pack, Price per pcs
● In stock
from $0.313 incl. VAT
Eye width: 10 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 35 kg, 10 pcs/pack, Price per pcs
● In stock
$0.313 incl. VAT
Eye width: 20 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 30 kg, 10 pcs/pack, Price per pcs
● In stock
$0.313 incl. VAT
Eye width: 12 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 30 kg, 10 pcs/pack, Price per pcs
● In stock
$0.313 incl. VAT
Eye width: 12 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 115 kg, 10 pcs/pack, Price per pcs
● In stock
$0.424 incl. VAT
Eye width: 19 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 30 kg, 10 pcs/pack, Price per pcs
● In stock
$0.420 incl. VAT
Eye width: 10 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 35 kg, 10 pcs/pack, Price per pcs
● In stock
$0.393 incl. VAT
Eye width: 13 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 100 kg, 10 pcs/pack, Price per pcs
● In stock
$0.420 incl. VAT
Eye width: 10 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 90 kg, 10 pcs/pack, Price per pcs
● In stock
$0.393 incl. VAT
Eye width: 20 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 30 kg, 10 pcs/pack, Price per pcs
● In stock
$0.454 incl. VAT
Eye width: 10 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 35 kg, 10 pcs/pack, Price per pcs
● In stock
$0.426 incl. VAT
Eye width: 13 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 100 kg, 10 pcs/pack, Price per pcs
● In stock
$0.471 incl. VAT
Eye width: 10 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 90 kg, 10 pcs/pack, Price per pcs
● In stock
$0.471 incl. VAT
Eye width: 20 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 30 kg, 10 pcs/pack, Price per pcs
● In stock
$0.839 incl. VAT