Eye width: 20–25 mm, Sizes: 2, Material: Zinc Die Casting, Breaking load: up to 240 kg, 10 pcs/pack, Price per pcs
● In stock
from $0.968 incl. VAT
Material
Price
Low
The most affordable option. When you need many pieces at a reasonable price, this is the right choice.
Strength
Medium
Handles everyday walks and regular use. Sufficient for calm and moderately active dogs, but may deform under repeated strong pulling.
Corrosion resistance
Limited
Holds up fine in dry conditions, but starts to oxidise or change surface gradually with repeated moisture contact. Not suitable for permanently wet environments without protection.
Water
Fresh water
Tolerates occasional contact with fresh water — rain, puddles, brief immersion. Better to dry after being in water, otherwise it may degrade over time.
| Weight | Medium | Weight is noticeable — more sensitive animals will notice it. For miniature and toy breeds, consider whether it is still comfortable. |
|---|---|---|
| Allergy risk | Depends on finish | The material itself will not cause allergy, but the surface finishes commonly applied to it may contain nickel or other allergens. What matters is which finish you choose. |
| Aging | Degrades | Without a protective surface finish it deteriorates functionally and visually over time. Manifests as colour loss, surface roughening or the formation of rust. |
| Maintenance | Regular maintenance | To keep the material in good condition and looking good, it needs regular attention — treating, oiling or impregnating. Neglect significantly shortens its lifespan. |
A zinc alloy that is die-cast – the same family as Zamak. The most widely used material in our hardware: over a thousand products.
Die casting produces complex shapes with a smooth surface at a reasonable price. Snap hooks, side release buckles, buckles and keepers – all available in finishes from nickel through antique brass to rainbow neo-chrome.
Resistance to damp and suitability for allergy sufferers depend on the finish chosen – check its page. For extreme pulling force, choose steel or stainless steel instead; for the sea, bronze.
Unchanged as long as the finish stays intact; wipe hardware dry and skip long soaking.
Zinc casting can even reproduce fine relief detail – which is why our buckles have sharp lines and crisp logos.
Eye width: 20–25 mm, Sizes: 2, Material: Zinc Die Casting, Breaking load: up to 240 kg, 10 pcs/pack, Price per pcs
● In stock
from $0.968 incl. VAT
Eye width: 16–25 mm, Sizes: 3, Material: Zinc Die Casting, Breaking load: up to 240 kg, 10 pcs/pack, Price per pcs
● In stock
from $0.714 incl. VAT
Eye width: 15–20 mm, Sizes: 2, Material: Zinc Die Casting, Breaking load: up to 200 kg, 10 pcs/pack, Price per pcs
● In stock
from $1.73 incl. VAT
Eye width: 13–18 mm, Sizes: 2, Material: Zinc Die Casting, Breaking load: up to 204 kg, 10 pcs/pack, Price per pcs
● In stock
from $0.599 incl. VAT
Eye width: 15–20 mm, Sizes: 2, Material: Zinc Die Casting, Breaking load: up to 200 kg, 10 pcs/pack, Price per pcs
● In stock
from $1.79 incl. VAT
Eye width: 13–18 mm, Sizes: 2, Material: Zinc Die Casting, Breaking load: up to 204 kg, 10 pcs/pack, Price per pcs
● In stock
from $0.605 incl. VAT
Eye width: 13–18 mm, Sizes: 2, Material: Zinc Die Casting, Breaking load: up to 204 kg, 10 pcs/pack, Price per pcs
● In stock
from $0.714 incl. VAT
Eye width: 17–25 mm, Sizes: 3, Material: Zinc Die Casting, Breaking load: up to 166 kg, 10 pcs/pack, Price per pcs
● Out of stock
from $0.774 incl. VAT
Eye width: 17–20 mm, Sizes: 2, Material: Zinc Die Casting, Breaking load: up to 197 kg, 10 pcs/pack, Price per pcs
● Out of stock
from $1.016 incl. VAT
Eye width: 17 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 197 kg, 10 pcs/pack, Price per pcs
● Out of stock
$1.041 incl. VAT
Eye width: 13 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 130 kg, 10 pcs/pack, Price per pcs
● In stock
$2.36 incl. VAT
Eye width: 20 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 120 kg, 10 pcs/pack, Price per pcs
● In stock
$2.61 incl. VAT
Eye width: 10 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 100 kg, 10 pcs/pack, Price per pcs
● In stock
$0.509 incl. VAT
Eye width: 13 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 130 kg, 10 pcs/pack, Price per pcs
● In stock
$1.016 incl. VAT
Eye width: 16–25 mm, Sizes: 3, Material: Zinc Die Casting, Breaking load: up to 160 kg, 10 pcs/pack, Price per pcs
● In stock
from $1.065 incl. VAT
Eye width: 10 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 100 kg, 10 pcs/pack, Price per pcs
● In stock
$0.484 incl. VAT
Eye width: 13 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 130 kg, 10 pcs/pack, Price per pcs
● In stock
$0.889 incl. VAT
Eye width: 16–25 mm, Sizes: 3, Material: Zinc Die Casting, Breaking load: up to 160 kg, 10 pcs/pack, Price per pcs
● In stock
from $1.004 incl. VAT
Eye width: 10 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 100 kg, 10 pcs/pack, Price per pcs
● In stock
$0.398 incl. VAT
Eye width: 13 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 130 kg, 10 pcs/pack, Price per pcs
● In stock
$0.922 incl. VAT
Eye width: 16–20 mm, Sizes: 2, Material: Zinc Die Casting, Breaking load: up to 160 kg, 10 pcs/pack, Price per pcs
● In stock
from $0.980 incl. VAT
Eye width: 13–20 mm, Sizes: 3, Material: Zinc Die Casting, Breaking load: up to 180 kg, 10 pcs/pack, Price per pcs
● In stock
from $0.953 incl. VAT
Eye width: 16–25 mm, Sizes: 3, Material: Zinc Die Casting, Breaking load: up to 230 kg, 10 pcs/pack, Price per pcs
● In stock
from $1.053 incl. VAT
Eye width: 10 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 100 kg, 10 pcs/pack, Price per pcs
● In stock
$0.420 incl. VAT
Eye width: 13 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 130 kg, 10 pcs/pack, Price per pcs
● In stock
$0.738 incl. VAT
Eye width: 20 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 230 kg, 10 pcs/pack, Price per pcs
● In stock
$0.774 incl. VAT
Eye width: 13 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 150 kg, 10 pcs/pack, Price per pcs
● Out of stock
$0.738 incl. VAT
Eye width: 16–20 mm, Sizes: 2, Material: Zinc Die Casting, Breaking load: up to 160 kg, 10 pcs/pack, Price per pcs
● Out of stock
from $1.17 incl. VAT
Eye width: 10 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 100 kg, 10 pcs/pack, Price per pcs
● Out of stock
$0.557 incl. VAT
Eye width: 13 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 113 kg, 10 pcs/pack, Price per pcs
● Out of stock
$0.835 incl. VAT
Eye width: 16–25 mm, Sizes: 3, Material: Zinc Die Casting, Breaking load: up to 240 kg, 10 pcs/pack, Price per pcs
● Out of stock
from $0.847 incl. VAT
Eye width: 20 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 200 kg, 10 pcs/pack, Price per pcs
● In stock
$0.920 incl. VAT
Eye width: 13 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 130 kg, 10 pcs/pack, Price per pcs
● Out of stock
$1.11 incl. VAT
Eye width: 20 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 200 kg, 10 pcs/pack, Price per pcs
● In stock
$1.42 incl. VAT
Eye width: 13–25 mm, Sizes: 4, Material: Zinc Die Casting, Breaking load: up to 338 kg, 10 pcs/pack, Price per pcs
● In stock
from $1.065 incl. VAT
Eye width: 17–20 mm, Sizes: 2, Material: Zinc Die Casting, Breaking load: up to 338 kg, 10 pcs/pack, Price per pcs
● In stock
from $1.016 incl. VAT