Eye width: 9 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 2 kg, 10 pcs/pack, Price per pcs
● In stock
$0.300 incl. VAT
Surface finish
Look
Glossy silver
Mirror or highly glossy silver surface. Classic, clean appearance that looks elegant at first glance. Fingerprints and minor scratches are more visible than on a matte surface.
Abrasion resistance
High
Resists daily use even with active dogs. The surface holds its original appearance for a long time, even when in contact with straps, snaps or other hard surfaces.
Corrosion protection
Good
Reliably protects the underlying material during typical outdoor use — rain, dew, occasional wetting. May not be sufficient for permanently wet environments.
Nickel
Yes, in interlayer
Nickel is not on the surface but in the interlayer beneath. As long as the top layer is intact, it will not reach the skin. Once the surface wears through, nickel may be released.
| Damp conditions | Outdoor use | Handles typical outdoor conditions without issue — rain, mud, moisture, sweat. No need to dry or treat specially after every water contact. |
|---|---|---|
| Aging | Gradually dulls | Over time loses its original gloss and the tone changes slightly. This does not affect function, but the surface eventually does not look as fresh as at the start. |
| Process | Galvanic | Metal layer applied by electric current in a bath. Even, thin and adhesive coating — the most widespread method for surface finishing of metal parts. |
Classic electroplating: copper, nickel, and on top a thin layer of chrome. Nickel stays in the underlayer, chrome is on the surface.
A mirror-bright silver shine and a hard, abrasion-resistant surface – the most widely used finish for glossy hardware.
The standard for everyday products – buckles, snap hooks, keepers. Worn edges can expose the nickel underlayer; for a confirmed nickel allergy, recommend stainless steel or matte black instead.
The shine lasts for years; fingerprints show up on it more than on a matte finish.
Everything – chrome is a colour-neutral. Its darker relative is black chrome.
Eye width: 9 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 2 kg, 10 pcs/pack, Price per pcs
● In stock
$0.300 incl. VAT
Eye width: 8 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 2 kg, 10 pcs/pack, Price per pcs
● In stock
$0.229 incl. VAT
Heavy duty Roller buckle, single prong, chrome plated steel.
● In stock
from $0.355 incl. VAT
Double Prong Roller buckle, chrome plated steel.
● In stock
from $1.47 incl. VAT
Center bar buckle , zinc die cast, chome plated. Ideal for your leathercrafts projects.
● In stock
from $0.248 incl. VAT
Inner width: 16–25 mm, Sizes: 3, Material: brass sand casting, 10 pcs/pack, Price per pcs
● In stock
from $1.39 incl. VAT
Inner width: 13 mm, Sizes: 1, Material: zinc die casting, 10 pcs/pack, Price per pcs
● In stock
$0.534 incl. VAT
Inner width: 25 mm, Prong Ø: 4 mm, Material: zinc die casting, Weight: 11 g, 10 pcs/pack, Price per pcs
● In stock
$0.381 incl. VAT
Inner width: 29 mm, Prong Ø: 4 mm, Material: zinc die casting, Weight: 16 g, 10 pcs/pack, Price per pcs
● In stock
$0.640 incl. VAT
Inner width: 30 mm, Prong Ø: 3.3 mm, Material: zinc die casting, Weight: 11 g, 10 pcs/pack, Price per pcs
● In stock
$0.518 incl. VAT
Inner width: 32–38 mm, Prong Ø: 4.8 mm, Material: brass sand casting, Weight: 26 g, 1 pcs/pack, Price per pcs
● In stock
from $1.91 incl. VAT
Inner width: 35 mm, Prong Ø: 4 mm, Material: zinc die casting, Weight: 27 g, 10 pcs/pack, Price per pcs
● In stock
$0.681 incl. VAT
Inner width: 40 mm, Prong Ø: 4.2 mm, Material: zinc die casting, Weight: 41 g, 10 pcs/pack, Price per pcs
● In stock
$1.17 incl. VAT
Inner width: 40 mm, Prong Ø: 4 mm, Material: zinc die casting, Weight: 42 g, 10 pcs/pack, Price per pcs
● In stock
$1.28 incl. VAT
Inner width: 30 mm, Prong Ø: 3.8 mm, Material: zinc die casting, Weight: 47 g, 1 pcs/pack, Price per pcs
● In stock
$2.14 incl. VAT
Inner width: 13–26 mm, Sizes: 4, Material: zinc die casting, 10 pcs/pack, Price per pcs
● In stock
from $0.272 incl. VAT
Inner width: 26 mm, Sizes: 1, Material: steel, 10 pcs/pack, Price per pcs
● In stock
$1.14 incl. VAT
Eye width: 25 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 250 kg, 10 pcs/pack, Price per pcs
● In stock
$2.29 incl. VAT
Eye width: 25 mm, Sizes: 1, Material: Brass Sand Casting, Breaking load: up to 240 kg, 10 pcs/pack, Price per pcs
● In stock
$3.51 incl. VAT
Eye width: 25 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 130 kg, 10 pcs/pack, Price per pcs
● In stock
$1.22 incl. VAT
Eye width: 17 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 180 kg, 10 pcs/pack, Price per pcs
● In stock
$0.934 incl. VAT
Eye width: 25 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 220 kg, 10 pcs/pack, Price per pcs
● In stock
$2.66 incl. VAT
Eye width: 12 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 340 kg, 10 pcs/pack, Price per pcs
● In stock
$2.50 incl. VAT
Eye width: 25 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 250 kg, 10 pcs/pack, Price per pcs
● In stock
$2.66 incl. VAT
Eye width: 25 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 290 kg, 10 pcs/pack, Price per pcs
● In stock
$3.05 incl. VAT
Eye width: 25 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 500 kg, 10 pcs/pack, Price per pcs
● In stock
$3.62 incl. VAT
Inner width: 13–25 mm, Sizes: 4, Material: zinc die casting, 10 pcs/pack, Price per pcs
● In stock
from $0.235 incl. VAT
Inner width: 32 mm, Sizes: 1, Material: brass sand casting, 10 pcs/pack, Price per pcs
● In stock
$3.27 incl. VAT
Inner width: 17–25 mm, Sizes: 3, Material: zinc die casting, 10 pcs/pack, Price per pcs
● In stock
from $0.580 incl. VAT
Inner width: 28 mm, Sizes: 1, Material: zinc die casting, 10 pcs/pack, Price per pcs
● In stock
$1.18 incl. VAT
Inner width: 13–25 mm, Sizes: 4, Material: zinc die casting, 10 pcs/pack, Price per pcs
● In stock
from $0.209 incl. VAT
Inner width: 50 mm, Sizes: 1, Material: steel, 10 pcs/pack, Price per pcs
● In stock
$1.059 incl. VAT
Inner width: 27 mm, Sizes: 1, Material: steel, 10 pcs/pack, Price per pcs
● In stock
$0.939 incl. VAT
Inner width: 25 mm, Sizes: 1, Material: steel, 10 pcs/pack, Price per pcs
● In stock
$0.885 incl. VAT
Precision in every link. This 4 mm diameter chain lead, 60 cm long, is the perfect base for your own product line – the material …
● In stock
$3.57 incl. VAT