Display O-Ring with hook. Easy to display your finished products.
● In stock
$1.12 incl. VAT
Surface finish
Look
Glossy silver
Mirror or highly glossy silver surface. Classic, clean appearance that looks elegant at first glance. Fingerprints and minor scratches are more visible than on a matte surface.
Abrasion resistance
High
Resists daily use even with active dogs. The surface holds its original appearance for a long time, even when in contact with straps, snaps or other hard surfaces.
Corrosion protection
Good
Reliably protects the underlying material during typical outdoor use — rain, dew, occasional wetting. May not be sufficient for permanently wet environments.
Nickel
Yes, in interlayer
Nickel is not on the surface but in the interlayer beneath. As long as the top layer is intact, it will not reach the skin. Once the surface wears through, nickel may be released.
| Damp conditions | Outdoor use | Handles typical outdoor conditions without issue — rain, mud, moisture, sweat. No need to dry or treat specially after every water contact. |
|---|---|---|
| Aging | Gradually dulls | Over time loses its original gloss and the tone changes slightly. This does not affect function, but the surface eventually does not look as fresh as at the start. |
| Process | Galvanic | Metal layer applied by electric current in a bath. Even, thin and adhesive coating — the most widespread method for surface finishing of metal parts. |
Classic electroplating: copper, nickel, and on top a thin layer of chrome. Nickel stays in the underlayer, chrome is on the surface.
A mirror-bright silver shine and a hard, abrasion-resistant surface – the most widely used finish for glossy hardware.
The standard for everyday products – buckles, snap hooks, keepers. Worn edges can expose the nickel underlayer; for a confirmed nickel allergy, recommend stainless steel or matte black instead.
The shine lasts for years; fingerprints show up on it more than on a matte finish.
Everything – chrome is a colour-neutral. Its darker relative is black chrome.
Display O-Ring with hook. Easy to display your finished products.
● In stock
$1.12 incl. VAT
Eye width: 10–17 mm, Sizes: 3, Material: Zinc Die Casting, Breaking load: up to 166 kg, 10 pcs/pack, Price per pcs
● In stock
from $0.610 incl. VAT
Eye width: 13–20 mm, Sizes: 3, Material: Zinc Die Casting, Breaking load: up to 197 kg, 10 pcs/pack, Price per pcs
● In stock
from $0.817 incl. VAT
Eye width: 17–25 mm, Sizes: 3, Material: Zinc Die Casting, Breaking load: up to 166 kg, 10 pcs/pack, Price per pcs
● In stock
from $0.610 incl. VAT
Eye width: 17–25 mm, Sizes: 3, Material: Zinc Die Casting, Breaking load: up to 197 kg, 10 pcs/pack, Price per pcs
● In stock
from $0.817 incl. VAT
Eye width: 13–20 mm, Sizes: 3, Material: Zinc Die Casting, Breaking load: up to 180 kg, 10 pcs/pack, Price per pcs
● In stock
from $0.953 incl. VAT
Eye width: 13 mm, Sizes: 1, Material: Brass Sand Casting, Breaking load: up to 130 kg, 10 pcs/pack, Price per pcs
● In stock
$2.91 incl. VAT
Eye width: 16–25 mm, Sizes: 3, Material: Zinc Die Casting, Breaking load: up to 230 kg, 10 pcs/pack, Price per pcs
● In stock
from $1.053 incl. VAT
Eye width: 20 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 200 kg, 10 pcs/pack, Price per pcs
● In stock
$1.42 incl. VAT
Eye width: 13 mm, Sizes: 1, Material: Brass Sand Casting, Breaking load: up to 114 kg, 10 pcs/pack, Price per pcs
● In stock
$2.23 incl. VAT
Eye width: 17 mm, Sizes: 1, Material: Brass Sand Casting, Breaking load: up to 224 kg, 10 pcs/pack, Price per pcs
● In stock
$3.24 incl. VAT
Eye width: 20 mm, Sizes: 1, Material: Brass Sand Casting, Breaking load: up to 200 kg, 10 pcs/pack, Price per pcs
● In stock
$3.32 incl. VAT
Eye width: 13–25 mm, Sizes: 4, Material: Zinc Die Casting, Breaking load: up to 338 kg, 10 pcs/pack, Price per pcs
● In stock
from $1.065 incl. VAT
Eye width: 28 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 340 kg, 10 pcs/pack, Price per pcs
● In stock
$1.82 incl. VAT
Eye width: 20–40 mm, Sizes: 5, Material: Zinc Die Casting, Breaking load: up to 260 kg, 10 pcs/pack, Price per pcs
● In stock
from $1.089 incl. VAT
Eye width: 6 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 60 kg, 10 pcs/pack, Price per pcs
● In stock
$0.422 incl. VAT
Eye width: 10 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 35 kg, 10 pcs/pack, Price per pcs
● In stock
$0.313 incl. VAT
Eye width: 8–10 mm, Sizes: 2, Material: Zinc Die Casting, Breaking load: up to 115 kg, 10 pcs/pack, Price per pcs
● In stock
from $0.409 incl. VAT
Eye width: 10–13 mm, Sizes: 2, Material: Zinc Die Casting, Breaking load: up to 200 kg, 10 pcs/pack, Price per pcs
● In stock
from $0.536 incl. VAT
Eye width: 17–25 mm, Sizes: 3, Material: Zinc Die Casting, Breaking load: up to 30 kg, 10 pcs/pack, Price per pcs
● In stock
from $0.313 incl. VAT
Eye width: 13 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 100 kg, 10 pcs/pack, Price per pcs
● In stock
$0.409 incl. VAT
Eye width: 13 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 200 kg, 10 pcs/pack, Price per pcs
● In stock
$0.536 incl. VAT
Eye width: 10–12 mm, Sizes: 2, Material: Zinc Die Casting, Breaking load: up to 15 kg, 10 pcs/pack, Price per pcs
● In stock
from $0.191 incl. VAT
Eye width: 40 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 40 kg, 10 pcs/pack, Price per pcs
● In stock
$0.673 incl. VAT
Eye width: 6–16 mm, Sizes: 3, Material: Zinc Die Casting, Breaking load: up to 25 kg, 10 pcs/pack, Price per pcs
● In stock
from $0.197 incl. VAT
Eye width: 16–20 mm, Sizes: 2, Material: Zinc Die Casting, Breaking load: up to 25 kg, 10 pcs/pack, Price per pcs
● In stock
from $0.204 incl. VAT
Eye width: 20–40 mm, Sizes: 4, Material: Zinc Die Casting, Breaking load: up to 60 kg, 10 pcs/pack, Price per pcs
● In stock
from $0.551 incl. VAT
Eye width: 10–50 mm, Sizes: 7, Material: Zinc Die Casting, Breaking load: up to 60 kg, 10 pcs/pack, Price per pcs
● In stock
from $0.547 incl. VAT
Eye width: 20–40 mm, Sizes: 3, Material: Steel, Breaking load: up to 40 kg, 10 pcs/pack, Price per pcs
● In stock
from $0.381 incl. VAT
Eye width: 17 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 40 kg, 10 pcs/pack, Price per pcs
● In stock
$1.74 incl. VAT
Eye width: 20–25 mm, Sizes: 3, Material: Zinc Die Casting, Breaking load: up to 200 kg, 10 pcs/pack, Price per pcs
● In stock
from $1.17 incl. VAT
Eye width: 13–20 mm, Sizes: 3, Material: Zinc Die Casting, Breaking load: up to 300 kg, 10 pcs/pack, Price per pcs
● In stock
from $1.101 incl. VAT
Eye width: 30 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 30 kg, 10 pcs/pack, Price per pcs
● In stock
$0.479 incl. VAT
Eye width: 10 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 200 kg, 10 pcs/pack, Price per pcs
● In stock
$1.076 incl. VAT
Eye width: 8–18 mm, Sizes: 4, Material: Zinc Die Casting, Breaking load: up to 120 kg, 10 pcs/pack, Price per pcs
● In stock
from $0.762 incl. VAT
Eye width: 16 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 2 kg, 10 pcs/pack, Price per pcs
● In stock
$0.174 incl. VAT