Inner width: 30–40 mm, Sizes: 3, Material: zinc die casting, 10 pcs/pack, Price per pcs
● In stock
from $0.629 incl. VAT
Surface finish
Look
Dark / black
Black or dark graphite surface — matte, glossy or satin depending on the specific finish. Discreet, modern look that does not draw attention and suits virtually any strap colour.
Abrasion resistance
Medium
Handles normal everyday wear. At exposed points — where regular friction or contact with other metals occurs — traces of wear may appear over time.
Corrosion protection
Good
Reliably protects the underlying material during typical outdoor use — rain, dew, occasional wetting. May not be sufficient for permanently wet environments.
Nickel
Yes
Nickel is a direct component of the surface layer that comes into contact with skin. Not suitable for nickel allergy sufferers — can cause contact dermatitis in both the dog and anyone handling the product.
| Damp conditions | Outdoor use | Handles typical outdoor conditions without issue — rain, mud, moisture, sweat. No need to dry or treat specially after every water contact. |
|---|---|---|
| Aging | Gradually dulls | Over time loses its original gloss and the tone changes slightly. This does not affect function, but the surface eventually does not look as fresh as at the start. |
| Process | Galvanic | Metal layer applied by electric current in a bath. Even, thin and adhesive coating — the most widespread method for surface finishing of metal parts. |
An electroplated layer of black nickel over a brushed base – the fine grain scatters reflections.
A dark matte finish that hides fingerprints and small scratches from wear.
Men's belts and muted dark products. It contains nickel on the surface – for customers with an allergy, offer matte black or stainless steel instead.
The matte finish is forgiving of small marks; on the edges of a strap the dark layer can wear through locally over time.
Dark clothing and black leather; belt screws and keepers in the same finish for a matched set.
Inner width: 30–40 mm, Sizes: 3, Material: zinc die casting, 10 pcs/pack, Price per pcs
● In stock
from $0.629 incl. VAT
Inner width: 40 mm, Prong Ø: 0 mm, Material: steel, Weight: 33 g, 5 pcs/pack, Price per pcs
● In stock
$2.72 incl. VAT
Inner width: 30 mm, Prong Ø: 4.6 mm, Material: zinc die casting, Weight: 49 g, 10 pcs/pack, Price per pcs
● In stock
$3.58 incl. VAT
Inner width: 35 mm, Prong Ø: 0 mm, Material: zinc die casting, Weight: 88 g, 1 pcs/pack, Price per pcs
● In stock
$4.36 incl. VAT
Inner width: 30 mm, Prong Ø: 4 mm, Material: zinc die casting, Weight: 22 g, 10 pcs/pack, Price per pcs
● In stock
$1.40 incl. VAT
Inner width: 30 mm, Prong Ø: 3.8 mm, Material: zinc die casting, Weight: 19 g, 10 pcs/pack, Price per pcs
● In stock
$1.26 incl. VAT
Inner width: 35 mm, Prong Ø: 3.8 mm, Material: zinc die casting, Weight: 38 g, 10 pcs/pack, Price per pcs
● In stock
$1.66 incl. VAT
Inner width: 30 mm, Prong Ø: 4 mm, Material: zinc die casting, Weight: 22 g, 10 pcs/pack, Price per pcs
● In stock
$1.26 incl. VAT
Inner width: 30 mm, Prong Ø: 4 mm, Material: zinc die casting, Weight: 25 g, 10 pcs/pack, Price per pcs
● In stock
$1.37 incl. VAT
Inner width: 35 mm, Prong Ø: 4 mm, Material: zinc die casting, Weight: 38 g, 10 pcs/pack, Price per pcs
● In stock
$1.60 incl. VAT
Inner width: 35 mm, Prong Ø: 4 mm, Material: zinc die casting, Weight: 32 g, 10 pcs/pack, Price per pcs
● In stock
$1.55 incl. VAT
Inner width: 35 mm, Prong Ø: 4.2 mm, Material: zinc die casting, Weight: 33 g, 10 pcs/pack, Price per pcs
● In stock
$1.50 incl. VAT
Inner width: 40 mm, Prong Ø: 4.2 mm, Material: zinc die casting, Weight: 32 g, 10 pcs/pack, Price per pcs
● In stock
$2.57 incl. VAT
Inner width: 40 mm, Prong Ø: 4.2 mm, Material: zinc die casting, Weight: 32 g, 10 pcs/pack, Price per pcs
● In stock
$1.49 incl. VAT
Inner width: 40 mm, Prong Ø: 5.5 mm, Material: zinc die casting, Weight: 58 g, 10 pcs/pack, Price per pcs
● In stock
$2.09 incl. VAT
Inner width: 40 mm, Prong Ø: 4 mm, Material: zinc die casting, Weight: 37 g, 10 pcs/pack, Price per pcs
● In stock
$1.60 incl. VAT
Inner width: 40 mm, Prong Ø: 4.2 mm, Material: zinc die casting, Weight: 45 g, 10 pcs/pack, Price per pcs
● In stock
$1.75 incl. VAT
Inner width: 38 mm, Prong Ø: 4.5 mm, Material: zinc die casting, Weight: 72 g, 10 pcs/pack, Price per pcs
● In stock
$3.00 incl. VAT
Length: 5–6 mm, Sizes: 2, Material: zinc die casting, 100 pcs/pack, Price per pack
● In stock
from $41.14 incl. VAT