Eye width: 17–20 mm, Sizes: 2, Material: Zinc Die Casting, Breaking load: up to 197 kg, 10 pcs/pack, Price per pcs
● In stock
from $0.826 incl. VAT
Surface finish
Look
Dark / black
Black or dark graphite surface — matte, glossy or satin depending on the specific finish. Discreet, modern look that does not draw attention and suits virtually any strap colour.
Abrasion resistance
High
Resists daily use even with active dogs. The surface holds its original appearance for a long time, even when in contact with straps, snaps or other hard surfaces.
Corrosion protection
Good
Reliably protects the underlying material during typical outdoor use — rain, dew, occasional wetting. May not be sufficient for permanently wet environments.
Nickel
No
The finish contains no nickel in any layer. A safe choice for allergy sufferers and for products intended for direct contact with sensitive skin.
| Damp conditions | Outdoor use | Handles typical outdoor conditions without issue — rain, mud, moisture, sweat. No need to dry or treat specially after every water contact. |
|---|---|---|
| Aging | Gradually dulls | Over time loses its original gloss and the tone changes slightly. This does not affect function, but the surface eventually does not look as fresh as at the start. |
| Process | Coating | Organic film — lacquer or paint — applied to the surface and cured in an oven. Thicker layer than galvanic plating, available in any colour. |
A baked-on coating: hardware gets a black layer that is cured in an oven. It's thicker than electroplated layers and contains no nickel in any layer.
A modern, glare-free matte finish, good corrosion protection, and peace of mind for allergy sufferers.
Outdoor, tactical and urban black products; the first choice for dark hardware where there's a nickel allergy. For a dark shine instead, reach for black chrome or black nickel.
The coating is durable; only a sharp edge will scratch through it – everyday wear won't.
Black on black – webbing, leather and hardware in one tone; it also makes a striking contrast with reflective webbing.
Eye width: 17–20 mm, Sizes: 2, Material: Zinc Die Casting, Breaking load: up to 197 kg, 10 pcs/pack, Price per pcs
● In stock
from $0.826 incl. VAT
Eye width: 15–25 mm, Sizes: 3, Material: Zinc Die Casting, Breaking load: up to 200 kg, 10 pcs/pack, Price per pcs
● In stock
from $1.78 incl. VAT
Eye width: 16–25 mm, Sizes: 3, Material: Zinc Die Casting, Breaking load: up to 240 kg, 10 pcs/pack, Price per pcs
● In stock
from $0.605 incl. VAT
Eye width: 20–25 mm, Sizes: 2, Material: Zinc Die Casting, Breaking load: up to 240 kg, 10 pcs/pack, Price per pcs
● In stock
from $0.968 incl. VAT
Eye width: 15–20 mm, Sizes: 2, Material: Zinc Die Casting, Breaking load: up to 200 kg, 10 pcs/pack, Price per pcs
● In stock
from $1.79 incl. VAT
Eye width: 13–18 mm, Sizes: 2, Material: Zinc Die Casting, Breaking load: up to 204 kg, 10 pcs/pack, Price per pcs
● In stock
from $0.605 incl. VAT
Eye width: 10 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 100 kg, 10 pcs/pack, Price per pcs
● In stock
$0.484 incl. VAT
Eye width: 13 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 130 kg, 10 pcs/pack, Price per pcs
● In stock
$0.889 incl. VAT
Eye width: 16–25 mm, Sizes: 3, Material: Zinc Die Casting, Breaking load: up to 160 kg, 10 pcs/pack, Price per pcs
● In stock
from $1.004 incl. VAT
Eye width: 13–20 mm, Sizes: 3, Material: Zinc Die Casting, Breaking load: up to 300 kg, 10 pcs/pack, Price per pcs
● In stock
from $1.016 incl. VAT
Eye width: 20–25 mm, Sizes: 2, Material: Zinc Die Casting, Breaking load: up to 230 kg, 10 pcs/pack, Price per pcs
● In stock
from $1.18 incl. VAT
Eye width: 19 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 30 kg, 10 pcs/pack, Price per pcs
● In stock
$0.420 incl. VAT
Eye width: 10 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 35 kg, 10 pcs/pack, Price per pcs
● In stock
$0.393 incl. VAT
Eye width: 13 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 100 kg, 10 pcs/pack, Price per pcs
● In stock
$0.420 incl. VAT
Eye width: 10 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 90 kg, 10 pcs/pack, Price per pcs
● In stock
$0.393 incl. VAT
Eye width: 40 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 40 kg, 10 pcs/pack, Price per pcs
● In stock
$0.605 incl. VAT
Eye width: 30–40 mm, Sizes: 2, Material: Zinc Die Casting, Breaking load: up to 35 kg, 10 pcs/pack, Price per pcs
● In stock
from $0.593 incl. VAT
Eye width: 10 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 90 kg, 10 pcs/pack, Price per pcs
● In stock
$0.422 incl. VAT
Eye width: 10–16 mm, Sizes: 3, Material: Zinc Die Casting, Breaking load: up to 90 kg, 10 pcs/pack, Price per pcs
● In stock
from $0.422 incl. VAT
Eye width: 25 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 200 kg, 10 pcs/pack, Price per pcs
● In stock
$1.21 incl. VAT
Eye width: 20 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 200 kg, 10 pcs/pack, Price per pcs
● In stock
$1.46 incl. VAT
Eye width: 20–25 mm, Sizes: 2, Material: Zinc Die Casting, Breaking load: up to 200 kg, 10 pcs/pack, Price per pcs
● In stock
from $1.42 incl. VAT
Eye width: 13 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 300 kg, 10 pcs/pack, Price per pcs
● In stock
$1.053 incl. VAT
Eye width: 11–20 mm, Sizes: 3, Material: Steel, Breaking load: up to 170 kg, 10 pcs/pack, Price per pcs
● In stock
from $1.102 incl. VAT
Eye width: 20–25 mm, Sizes: 3, Material: Steel, Breaking load: up to 300 kg, 10 pcs/pack, Price per pcs
● In stock
from $1.16 incl. VAT
Eye width: 23 mm, Sizes: 1, Material: Zinc Die Casting, Breaking load: up to 95 kg, 10 pcs/pack, Price per pcs
● In stock
$0.558 incl. VAT
Bestselling saddlery roller buckle with welded joint rated up to 200 kg. The roller facilitates correct tightening and protects the material from wear when the …
● In stock
from $0.150 incl. VAT
Looking for a reliable solution that combines a classic look with modern practicality? The roller buckle holds tight, is easy to adjust, and looks great …
● In stock
from $0.242 incl. VAT
Inner width: 10–50 mm, Sizes: 10, Material: zinc die casting, 10 pcs/pack, Price per pcs
● In stock
from $0.200 incl. VAT
Inner width: 20–25 mm, Sizes: 2, Material: zinc die casting, 10 pcs/pack, Price per pcs
● In stock
from $0.593 incl. VAT
Inner width: 32–40 mm, Prong Ø: 0 mm, Material: steel, Weight: 31 g, 5 pcs/pack, Price per pcs
● In stock
from $1.15 incl. VAT
Inner width: 40 mm, Prong Ø: 4 mm, Material: zinc die casting, Weight: 26 g, 10 pcs/pack, Price per pcs
● In stock
$0.762 incl. VAT
Inner width: 35–40 mm, Prong Ø: 3.5 mm, Material: brass sand casting, Weight: 50 g, 1 pcs/pack, Price per pcs
● In stock
from $4.48 incl. VAT
Inner width: 40 mm, Prong Ø: 4.6 mm, Material: stainless steel (aisi 304), Weight: 53 g, 1 pcs/pack, Price per pcs
● In stock
$4.14 incl. VAT
Inner width: 40 mm, Prong Ø: 4.6 mm, Material: stainless steel (aisi 304), Weight: 73 g, 1 pcs/pack, Price per pcs
● In stock
$4.88 incl. VAT
Inner width: 40 mm, Prong Ø: 5 mm, Material: stainless steel (aisi 304), Weight: 67 g, 1 pcs/pack, Price per pcs
● In stock
$4.84 incl. VAT