Inner Ø: 20–30 mm, Number of sizes: 3, Material: steel, 10 pcs/pack, Price per pc
● In stock
from
0,093 € / pc 0,133 €
Gray
Surface finish
Gray is a galvanic gunmetal finish in a dark graphite tone. Good corrosion protection, nickel-free and suited for outdoor use. Browse our gray hardware range.
Products: Gray
Prices include 21% VAT. More about VAT and customs fees.
-
D ring – Gray
Inner width: 16–40 mm, Number of sizes: 5, Material: steel, Breaking load: up to 300 kg, 10 pcs/pack, Price per pc
● In stock
from 0,090 € / pc
0,127 € -
Collar Loop – Gray
Inner width: 40 mm, Material: steel, 10 pcs/pack, Price per pc
● In stock
0,119 € / pc
0,169 € -
Metal Tri glide – Gray
Inner width: 30, 38 mm, Material: zinc die casting, 10 pcs/pack, Price per pc
● In stock
from 0,290 € / pc
0,415 € -
Roller buckle – Gray
Inner width: 16 mm, Material: steel, 10 pcs/pack, Price per pc
● In stock
0,123 € / pc
0,177 €
How grey is made
A gunmetal-type electroplated finish: a dark grey metallic layer deposited in a bath. No nickel.
What it gives the product
A graphite tone between silver and black: dark hardware that doesn't feel as harsh as matte black.
When to choose it and when not to
Saddlery rings and D-rings for muted colour combinations. The layer is thin, like other electroplated finishes. For extreme abrasion, choose matte black with its thicker coating instead.
How it ages
It gradually dulls; friction points may lighten.
What it pairs with
Grey, olive and black webbing; it also sits well with reflective elements.
-
Look
Dark / black
Black or dark graphite surface, matte, glossy or satin depending on the specific finish. Creates a low-contrast combination with dark straps and a clear contrast with pale colours.
-
Abrasion resistance
Low
Thin decorative coating that gradually wears through with regular wear and friction. Wear appears first where a buckle or snap contacts the strap, ring or fur.
-
Corrosion protection
Dry conditions
Provides a temporary barrier against moisture. Works well in dry environments, but protection weakens over time with regular contact with water or sweat.
-
Nickel
–
Nickel release test (abrasion method PN 93 0021, AZL Otrokovice testing laboratory): pass, within the limit of 0.5 µg/cm² per week used by EU regulation. test report (PDF, in Czech)
| Damp conditions | Occasional rain | Tolerates occasional contact with rain, wet grass or damp hands. Regular soaking accelerates visible wear, so dry the surface after it becomes wet. |
|---|---|---|
| Aging | Wear at contact points | At points of regular friction (typically the buckle edge, snap contact point or strap) the finish gradually wears through and the base material shows beneath. |
| Process | Galvanic | Metal layer applied by electric current in a bath. An even, thin and well-adhered coating: the most widespread method for surface finishing of metal parts. |