Inner width: 25 mm, Material: zinc die casting, Breaking load: up to 150 kg
● In stock
54.66 € / pc
Surface finish
Hardware with real gold (Au): 24-carat electroplate of 0.06–0.10 µm or PVD of 0.03 µm. How it differs from gold tone, when to choose it and how it ages.
Prices include 21% VAT. More about VAT and customs fees.
Inner width: 25 mm, Material: zinc die casting, Breaking load: up to 150 kg
● In stock
54.66 € / pc
Inner width: 8, 10, 12 mm, Inner height: 3–6 mm, Total length: 20–25 mm, Material: stainless steel (AISI 316)
● In stock
from 1.84 € / pc
The surface carries real gold (Au), not a gold-coloured alloy. Depending on the product, it is applied in one of two ways. The Fidlock magnetic fastener in zinc alloy is electroplated with 24-carat gold in a layer of 0.06–0.10 µm and finished with a clear protective lacquer. The magnetic clasps for bracelets in stainless steel have the gold deposited in a vacuum by PVD, in a layer of 0.03 µm.
The warm tone of real gold. The layer is very thin, hundredths to tenths of a micrometre, which is why the name says so. That is the difference from gold tone: gold tone contains no gold, its colour comes from a gold-coloured layer without gold.
Leather bracelets, handbags and collars where you want real gold on the hardware and the fastener is on display. Not for hardware that rubs against a strap or ring every day: a layer this thin wears through at friction points. If you only need the colour, gold tone is enough.
Gold itself does not corrode or tarnish. Wear is mechanical: where the fastener rubs, the layer gradually wears through and the material underneath shows. On the Fidlock fastener the protective lacquer wears first. The stainless steel of the bracelet clasps does not rust where it shows through.
Brown and dark leather, straps in warm colours, gold jewellery.
| Look | Gold | Warm golden tone, from pale yellow to deep gold. Pairs particularly well with brown leather and straps in warm colours. |
|---|---|---|
| Abrasion resistance | Low | Thin decorative coating that gradually wears through with regular wear and friction. Wear appears first where a buckle or snap contacts the strap, ring or fur. |
| Aging | Wear at contact points | At points of regular friction (typically the buckle edge, snap contact point or strap) the finish gradually wears through and the base material shows beneath. |