# Heavy-Duty Snap Fastener – Nickel Plated: 12.5 mm

- **Brand:** Pet Hardware®
- **SKU:** 805-12.5 NP
- **EAN:** 8595109557804
- **Category:** Rivets & Screws > Snap Fasteners
- **Material:** Steel
- **Surface finish:** Nickel plated
- **Size / inner width:** 12.5 mm
- **Weight:** 2 g
- **Minimum order:** 100 pcs
- **In stock:** Yes


## Description and construction

Every leathercrafter knows it's all in the details. AM saddlery snap fasteners will give your bags, wallets, or backpacks a truly professional finish and, unlike plastic, they can handle the toughest abuse. The four-part metal construction creates a rock-solid bond that you can snap and unsnap practically forever.

Key benefits:

    Heavy-duty strength: A solid, all-metal build that shrugs off washing, harsh weather, and intense daily use.
    Professional finish: The nickel-plated surface gives your products that clean, elegant saddlery style.
    Lifelong durability: Forget about hook-and-loop tape or plastic snaps. These press studs will last for years without ever needing a replacement.

Best uses and how to pick the right size:
Highly recommended for all makers of leather goods, backpacks, sheaths, and outdoor gear. Choose the right snap size based on the thickness of your material (leather, faux leather, or fabric):

    For material thickness up to 2.5 mm: Go with the 12.5 mm snap size.
    For material thickness up to 4 mm: Go with the standard 15 mm snap size.
    For thick materials (3 to 6 mm): Choose the extended 15-L version.

Things to keep in mind (limitations):

    Mind your setting method: The maximum material thickness limits apply exclusively when setting with a hand press. A press applies smooth, perfectly vertical pressure and stops exactly when the snap is properly seated. This secures the snap firmly without causing damage.
    The risks of hand hammering: When setting by hand (with a setter and mallet), you don't have 100% control over the force of the strike. It’s common for a heavy blow to make the post shift sideways and bend. Another frequent issue is striking the tool more times than necessary. This literally drives the post right through the top cap, deforming the snap and ruining its grip.
    Tips for hand setting: If you're setting snaps manually, stick closer to the middle of the material thickness range and work with a gentle touch—a few precise taps with the mallet are all it takes. For thicker leather, we recommend slightly skiving the flesh side around the joint area.

Pro tip for an effortless workflow:
For a 100% success rate with zero scrap, we highly recommend setting your snaps using the #3990-00 hand press and the matching setting dies. If you prefer to work by hand, use the #8101-805-12.5 hand setter (or the corresponding size for 15mm snaps). You'll find all the compatible tools in the recommended products below.


## Limits and maintenance

* Handles typical outdoor conditions without issue — rain, mud, moisture, sweat. No need to dry or treat specially after every water contact.
* Reliably protects the underlying material during typical outdoor use — rain, dew, occasional wetting. May not be sufficient for permanently wet environments.
* Handles normal everyday wear. At exposed points — where regular friction or contact with other metals occurs — traces of wear may appear over time.
* Over time loses its original gloss and the tone changes slightly. This does not affect function, but the surface eventually does not look as fresh as at the start.


## Parameters

| Parameter | Value |
|---|---|
| Button diameter | 12.5 mm |
| Shank length | 4 mm |
| Shank diameter | 3 mm |
| Length of second post | 5 mm |
| Material thickness | 1 – 3 mm |

## Pricing (USD)

| Quantity | Excl. VAT / pcs | Incl. VAT (21 %) / pcs | Price type |
|---|---|---|---|
| 100 pcs | 0.056 USD | 0.068 USD | Basic |
| 500 pcs | 0.032 USD | 0.039 USD | Package tier |
| 5000 pcs | 0.029 USD | 0.035 USD | Carton tier |



*Prices incl. VAT apply to EU end customers. EU VAT-registered businesses and export orders are priced excl. VAT — see cart or ?currency= for your case.*



## Compatible products (fits 12.5 mm)

* **Hand press:** SKU 3990-00
* **Dies for setting snap button ø 12.5 mm:** SKU 3992-805-12.5
* **Snap Setter Set (Line snaps) ø 12.5 mm:** SKU 8101-805-12.5


## Available size variants (series 805-12.5 NP)

* 12.5 mm: SKU 805-12.5 NP (this product)
* 15 mm: SKU 805-15 NP
* 15 mm: SKU 805-15-L NP



## Links

- Product page: https://www.pethardware.com/en/snap-fasteners/heavy-duty-snap-fastener-nickel-plated-4184/
- Category: https://www.pethardware.com/en/snap-fasteners/
- Video: https://www.youtube.com/watch?v=GcJgvE-MJnE
- How to rivet snap fasteners: http://blog.pethardware.com/en/rivet-snap-fasteners-snap-buttons/