# Single Cap Rivet – Antique Brass (1000 pcs): 13 mm

- **Brand:** Pet Hardware®
- **SKU:** 75 O - AB
- **EAN:** 8595109511257
- **Category:** Rivets & Screws > Single Cap Rivets
- **Material:** Steel
- **Surface finish:** Antique brass
- **Size / inner width:** 13 mm
- **Weight:** 1342 g
- **Minimum order:** 1 packs
- **In stock:** Yes


## Description and construction

Two-part saddlery rivet with bite (a very useful notch near the tip of the stem) that will speed up the riveting process, primarily for belts, collars and harnesses, and increase the strength of the join. Single cap rivets are used in places where only one side of the rivet is visible (belts, trunks, flap closure leather bags, … ). The price listed is for the entire package (1000 pcs)!

To set using the #3990-00 hand press, use the #3997-72 O die. For hand setting, the #8101-72 Z setter is used.

How to chose the correct-length rivet?

Whether we work with leather, webbing or fabric, the thickness of the material is always the deciding factor. For a the rivet to spread properly, choose one that is about 2 mm longer than the total thickness of the material. For rivet length see dimension "B" in the table.


## Limits and maintenance

* Tolerates contact with water — rain, wet grass, damp hands. With regular soaking the finish ages faster and loses appearance. Better to dry after wetting.
* The finish does not increase corrosion resistance. Either the underlying material does not need it, or the finish is purely aesthetic.
* Thin decorative coating that gradually wears through with regular wear and friction. Wear shows fairly quickly at points where buckle or snap contacts the strap, ring or fur.
* Surface is designed to change over time. Ageing deepens the character of the finish — the product looks different after a year than when new, and that is intentional, not a defect. Each piece ages slightly differently.


## Parameters

| Parameter | Value |
|---|---|
| Shank length | 13 mm |
| Shank diameter | 4 mm |
| Head diameter | 12 mm |
| Quantity per Pack | 1000 |

## Pricing (USD)

| Quantity | Excl. VAT / packs | Incl. VAT (21 %) / packs | Price type |
|---|---|---|---|
| 1 packs | 37.800 USD | 45.738 USD | Basic |
| 5 packs | 21.600 USD | 26.136 USD | Package tier |
| 20 packs | 19.440 USD | 23.522 USD | Carton tier |



*Prices incl. VAT apply to EU end customers. EU VAT-registered businesses and export orders are priced excl. VAT — see cart or ?currency= for your case.*



## Compatible products (fits 13 mm)

* **Kemovan Round Punches ø 4 mm:** SKU KEM/LSHP40
* **Replacement punches ø 4 mm:** SKU 211700STP-8
* **Setting dies for our Single Cap Rivet ø 12 mm:** SKU 3997-72 O
* **Rivet Setter ø 12 mm:** SKU RS/12x100
* **Setter with anvil for attaching saddlery rivets ø 12 mm:** SKU 8101-72 Z



## Frequently Asked Questions

### How do I choose the right rivet length?

The total thickness of the layers you're joining decides — add to it the shank overhang needed for spreading:


	
	Thinner materials — a shank 1–2 mm longer than the material thickness.
	
	
	Thicker materials — a shank 2–3 mm longer.
	


The shank length is listed for every rivet in the dimensions table as dimension B — the full range is in the Rivets & Screws category.

The hole diameter differs by material. For leather, choose a punch slightly smaller than the shank diameter — leather is elastic and grips the shank tightly. For waterproof webbing, choose a punch that matches the shank exactly; the webbing doesn't stretch, so the shank has to pass through without being forced.

A shank that's too long shows up as a rivet that deforms while spreading, or caps that don't line up.

Source: https://www.pethardware.com/en/faq/#delka-nytu


## Links

- Product page: https://www.pethardware.com/en/single-cap-rivets/single-cap-rivet-antique-brass-1000-pcs-1550/
- Category: https://www.pethardware.com/en/single-cap-rivets/
- : http://blog.pethardware.com/en/saddlery-rivets-1st-part/