# LOXX® High Washer – Brass: Washer

- **Brand:** Pet Hardware®
- **SKU:** 03697.14100
- **EAN:** 8595109532870
- **Category:** Rivets & Screws > LOXX Fasteners
- **Material:** Brass
- **Surface finish:** Polished
- **Size / inner width:** Washer
- **Weight:** 2 g
- **Minimum order:** 1 pcs
- **In stock:** Yes


## Description and construction

"When you mount a low washer on thick vegetable-tanned leather, the thread often only catches for a few turns. The fastener then can't be tightened securely, or it works loose over time. The raised LOXX® washer is made for exactly these thicker materials. The taller profile gives the thread more room to catch properly, even through material 1 to 4 mm thick. That means you can skip the time-consuming skiving of the leather at the joint entirely.

Limits and correct washer installation

    The fixing teeth must fully bite into the leather: When tightening, press the washer down so the teeth embed completely into the material. Quick check: After tightening, try turning the entire fastener with your fingers. If it moves, the teeth haven't seated properly and the fastener will spin during use.
    Minimum thickness 1 mm: On thinner materials the washer may not seat correctly and the fastener can remain loose. For these cases, use the standard flat washer instead.
    Maximum thickness 4 mm: If the total layer thickness exceeds 4 mm, the thread won't reach the top part of the fastener and the joint won't close at all. In that case you'll need to pair the washer with a top part that has a specially extended thread.

Installation and accessories

⚠️ Note: The fastener consists of two parts (top/bottom part). Both parts must be purchased separately to complete the fastener.

    Punching the hole: Use a hole punch with a 10 mm diameter to create the opening – available individually as #3777-14, #KEM/LSHP100 or as part of a set #24690, #KEM/LSHP/14SET.
    Attaching and tightening: For occasional tightening, a small wrench #04492.05000 works well. For regular use, we recommend the large wrench #04500.00000.
"


## Limits and maintenance

* The finish does not increase corrosion resistance. Either the underlying material does not need it, or the finish is purely aesthetic.
* Resists daily use even with active dogs. The surface holds its original appearance for a long time, even when in contact with straps, snaps or other hard surfaces.
* Over time loses its original gloss and the tone changes slightly. This does not affect function, but the surface eventually does not look as fresh as at the start.


## Parameters

| Parameter | Value |
|---|---|
| Part type | Washer |
| Height | 4 mm |
| Width | 20 mm |
| Inner ø | 10 mm |

## Pricing (USD)

| Quantity | Excl. VAT / pcs | Incl. VAT (21 %) / pcs | Price type |
|---|---|---|---|
| 1 pcs | 0.300 USD | 0.363 USD | Package tier |
| 20 pcs | 0.270 USD | 0.327 USD | Carton tier |



*Prices incl. VAT apply to EU end customers. EU VAT-registered businesses and export orders are priced excl. VAT — see cart or ?currency= for your case.*



## Compatible products (fits Washer)

* **LOXX® Fastener – Brass (Top):** SKU 05140.14000
* **LOXX® Fastener – Brass (Bottom):** SKU 95121.14000



## Links

- Product page: https://www.pethardware.com/en/loxx-fasteners/loxx-high-washer-polished-brass-6450/
- Category: https://www.pethardware.com/en/loxx-fasteners/
- Video: https://www.youtube.com/watch?v=5AdcdwRxbCs