# LOXX® High Washer – Antique Brass-Plated: Washer

- **Brand:** Pet Hardware®
- **SKU:** 03697.25000
- **EAN:** 8595109532900
- **Category:** Rivets & Screws > LOXX Fasteners
- **Material:** Brass
- **Surface finish:** Antique brass
- **Size / inner width:** Washer
- **Weight:** 2 g
- **Minimum order:** 1 pcs
- **In stock:** Yes


## Description and construction

"When you mount a low washer on thick vegetable-tanned leather, the thread often only catches for a few turns. The fastener then can't be tightened securely, or it works loose over time. The raised LOXX® washer is made for exactly these thicker materials. The taller profile gives the thread more room to catch properly, even through material 1 to 4 mm thick. That means you can skip the time-consuming skiving of the leather at the joint entirely.

Limits and correct washer installation

    The fixing teeth must fully bite into the leather: When tightening, press the washer down so the teeth embed completely into the material. Quick check: After tightening, try turning the entire fastener with your fingers. If it moves, the teeth haven't seated properly and the fastener will spin during use.
    Minimum thickness 1 mm: On thinner materials the washer may not seat correctly and the fastener can remain loose. For these cases, use the standard flat washer instead.
    Maximum thickness 4 mm: If the total layer thickness exceeds 4 mm, the thread won't reach the top part of the fastener and the joint won't close at all. In that case you'll need to pair the washer with a top part that has a specially extended thread.

Installation and accessories

⚠️ Note: The fastener consists of two parts (top/bottom part). Both parts must be purchased separately to complete the fastener.

    Punching the hole: Use a hole punch with a 10 mm diameter to create the opening – available individually as #3777-14, #KEM/LSHP100 or as part of a set #24690, #KEM/LSHP/14SET.
    Attaching and tightening: For occasional tightening, a small wrench #04492.05000 works well. For regular use, we recommend the large wrench #04500.00000.
"


## Limits and maintenance

* Tolerates contact with water — rain, wet grass, damp hands. With regular soaking the finish ages faster and loses appearance. Better to dry after wetting.
* The finish does not increase corrosion resistance. Either the underlying material does not need it, or the finish is purely aesthetic.
* Thin decorative coating that gradually wears through with regular wear and friction. Wear shows fairly quickly at points where buckle or snap contacts the strap, ring or fur.
* Surface is designed to change over time. Ageing deepens the character of the finish — the product looks different after a year than when new, and that is intentional, not a defect. Each piece ages slightly differently.


## Parameters

| Parameter | Value |
|---|---|
| Part type | Washer |
| Height | 4 mm |
| Width | 20 mm |
| Inner ø | 10 mm |

## Pricing (USD)

| Quantity | Excl. VAT / pcs | Incl. VAT (21 %) / pcs | Price type |
|---|---|---|---|
| 1 pcs | 0.330 USD | 0.399 USD | Package tier |
| 20 pcs | 0.297 USD | 0.359 USD | Carton tier |



*Prices incl. VAT apply to EU end customers. EU VAT-registered businesses and export orders are priced excl. VAT — see cart or ?currency= for your case.*



## Compatible products (fits Washer)

* **LOXX® Fastener – Antique Brass-Plated (Top):** SKU 05140.25000
* **LOXX® Fastener – Antique Brass-Plated (Bottom):** SKU 95121.25000



## Links

- Product page: https://www.pethardware.com/en/loxx-fasteners/loxx-high-washer-antique-brass-6448/
- Category: https://www.pethardware.com/en/loxx-fasteners/
- Video: https://www.youtube.com/watch?v=5AdcdwRxbCs