# Rotary Punch Sprenger ø 2–4.5 mm

- **Brand:** Pet Hardware®
- **SKU:** 57507 002 00
- **EAN:** 4022853116543
- **Category:** Leatherwork Tools > Leather Hole Punches
- **Material:** Steel
- **Size:** Punch Pliers
- **Weight:** 460 g
- **Minimum order:** 1 pc
- **In stock:** Yes


## Description and construction

Sprenger rotary hole punch pliers with a lever mechanism make working with thicker leather much easier. The lever action means you don't need to apply nearly as much force as with standard pliers, and the rotating head lets you switch hole sizes in seconds without swapping tools. You'll appreciate this especially when making belts, collars, and other leather goods where you alternate between different hole sizes.

Why choose these

    Six sizes without swapping tools: Just rotate the head and select 2, 2.5, 3, 3.5, 4, or 4.5 mm. The head locks firmly into position after rotating, so it won't spin during use.
    Less force needed: The lever mechanism multiplies the force from your hand, so you don't have to squeeze as hard. You'll notice the difference most when working with firm leather 3 to 4 mm thick.
    Replaceable drive punches: When one gets dull over time, simply swap it out for a new one. No need to buy a whole new pair of pliers. We offer replacement drive punches #55259 901 and a mounting wrench #55259 902.

When to choose a different tool

    Large holes in very thick leather: In material up to 5 mm thick, the pliers can punch smaller holes of 2 and 2.5 mm cleanly. For a 4.5 mm hole in leather that thick, you'll need to apply considerable force. In that case, we recommend using a hand hole punch and a mallet, which handle it more easily.
    Holes further from the edge: The pliers reach a maximum of 35 mm from the edge of the material. If you need to punch deeper into the surface, go with a hand hole punch, which has no reach limitation.

Important: This product is NOT SUITABLE for punching waterproof webbings or BioThane®. For these materials, we recommend using dedicated punching dies:

    Punches Ø 3–4 mm: for small holes for rivets and buckle tongues, minimizing damage to the webbing's load-bearing core.
    Punches Ø 5.2–6 mm: a 5.2 mm hole is intended for E10x5.2 eyelets, while a 6 mm hole is designed for E12x6.0 eyelets.


## Limits and maintenance

* Contact with water can cause corrosion, swelling, mould or other damage. Keep the material dry and dry it promptly if it becomes wet.
* The bare material has no useful corrosion resistance. Choose a protective finish when the product may come into contact with moisture or sweat.
* Regular treatment, oiling or impregnation helps preserve the material. Follow the care instructions for the complete product, because the required method and interval can vary.
* Without protection, both function and appearance deteriorate over time. Typical signs include colour loss, embrittlement or cracking, a rougher surface, rust or white corrosion products.


## Parameters

| Parameter | Value |
|---|---|
| Tool Type | Punch Pliers |
| ø MIN | 2 mm |
| ø MAX | 4.5 mm |

## Pricing (EUR)

| Quantity | Excl. VAT / pc | Incl. VAT (21 %) / pc | Total excl. VAT | Total incl. VAT | Price type |
|---|---|---|---|---|---|
| 1 pc | 46.06 EUR | 55.73 EUR | — | — | Package tier |



*Prices incl. VAT apply to EU end customers. EU VAT-registered businesses and export orders are priced excl. VAT — see cart or ?currency= for your case.*



## Available size variants (series 57507 002 00)

* Punch Pliers: SKU 57507 002 00 (this product)
* Replacement Punches: SKU 55259 901 00
* Sprenger Installation Wrench: SKU 55259 902 00



## Links

- Product page: https://www.pethardware.com/en/leather-hole-punchers/rotary-punch-sprenger-6457/
- Category: https://www.pethardware.com/en/leather-hole-punchers/
- Video: https://www.youtube.com/watch?v=PQ9C9_Ji2XM