# 4-In-1 Leather Punch ø 2 mm: 2 mm

- **Brand:** Pet Hardware®
- **SKU:** 3052-00
- **EAN:** 98834302506
- **Category:** Leatherwork Tools > Round Hole Punches
- **Material:** Steel
- **Size:** 2 mm
- **Weight:** 95 g
- **Minimum order:** 1 pcs
- **In stock:** Yes


## Description and construction

An excellent aid for hand-sewing leather. This tool punches four 2 mm holes at a time. The spacing between the individual holes is 6 mm. Hole sizes may vary slightly depending on leather type and weight. Suitable for working with light leather, 1.2–1.6 mm thick. 

If necessary, it is possible to buy a spare punch tube, #3053-00. To preserve keen edge on the punches, we recommend using #2015-00 wax and #3464-00 protection plate (see video).

Important: This product is NOT SUITABLE for punching waterproof webbings or BioThane®. For these materials, we recommend using dedicated punching dies:

    Punches Ø 3–4 mm: for small holes for rivets and buckle tongues, minimizing damage to the webbing's load-bearing core.
    Punches Ø 5.2–6 mm: a 5.2 mm hole is intended for E10x5.2 eyelets, while a 6 mm hole is designed for E12x6.0 eyelets.


## Limits and maintenance

* Water causes corrosion, swelling, mould or other damage. Must be dried immediately after wetting, and even then permanent deterioration is a risk.
* Without surface treatment it will start to rust as soon as it comes into contact with moisture. Rust gradually compromises both function and appearance — surface protection is a necessity.
* To keep the material in good condition and looking good, it needs regular attention — treating, oiling or impregnating. Neglect significantly shortens its lifespan.
* Without a protective surface finish it deteriorates functionally and visually over time. Manifests as colour loss, surface roughening or the formation of rust.


## Parameters

| Parameter | Value |
|---|---|
| Punch diameter | 2 mm |

## Pricing (USD)

| Quantity | Excl. VAT / pcs | Incl. VAT (21 %) / pcs | Price type |
|---|---|---|---|
| 1 pcs | 16.490 USD | 19.953 USD | Package tier |



*Prices incl. VAT apply to EU end customers. EU VAT-registered businesses and export orders are priced excl. VAT — see cart or ?currency= for your case.*



## Compatible products

* **Poly Cutting Board 30x30 cm:** SKU 3464-00
* **Steel-Plastic Mallet with Wooden Handle 594 g:** SKU 3303-11
* **Carriage Hand Sewing Wax:** SKU 2015-00
* **4-In-1 Leather Punch ø 2 mm:** SKU 3053-00


## Available size variants (series 3052-00)

* 2 mm: SKU 3052-00 (this product)
* 2 mm: SKU 3053-00



## Links

- Product page: https://www.pethardware.com/en/leather-hole-punchers/4-in-1-leather-punch-2913/
- Category: https://www.pethardware.com/en/leather-hole-punchers/
- Video: https://www.youtube.com/watch?time_continue=2&v=wMVk-34PtJE