# Double Cap Rivet – Stainless Steel (1000 pcs): 7 mm

- **Brand:** Pet Hardware®
- **SKU:** SS 66 Z
- **EAN:** 8595109561283
- **Category:** Rivets & Screws > Double Cap Rivets
- **Material:** Stainless steel (AISI 304)
- **Size / inner width:** 7 mm
- **Weight:** 420 g
- **Minimum order:** 1 packs
- **In stock:** Yes


## Description and construction

Double cap saddlery rivet with bite (a very useful notch near the tip of the stem) that will speed up the riveting process, primarily for belts, collars and harnesses, and increase the strength of the join. Double cap rivets are used where both sides of the rivet will be visible, or where a rivet comes in contact with other surfaces (purse and other handles, leashes, collars, harnesses, …). The price listed is for the entire package (1000 pcs)!

For proper riveting, it is essential to choose the right tool both for creating the hole and for setting the rivet itself. For making the hole, we recommend punches #KEM/LSHP30 or #211700STP-6. For riveting using the hand press #3990-00, use dies #3997-20 Z. For manual riveting, tools #8101-20 Z or #RS/6x100 are suitable. The size of the die or setting tool must always be selected according to the rivet size. You can also find suitable riveting tools among the recommended products below. The correct tool will be displayed based on the rivet size you select.

How to chose the correct-length rivet?

Whether we work with leather, webbing or fabric, the thickness of the material is always the deciding factor. For a the rivet to spread properly, choose one that is about 2–3 mm longer than the total thickness of the material. For rivet length see dimension "B" in the table.

Important Notice 72 Z - SS: This rivet is not made entirely of stainless steel.

  Top cap: Stainless steel (intended for the visible/front side).
  Bottom part with post: Nickel-plated copper (place on the back side; it may corrode in humid environments).


## Limits and maintenance

* Wet it, submerge it, leave it in water — fresh water will not harm it. No drying or treatment needed; water does not affect function or appearance.
* Withstands permanent contact with water, moisture and sweat without change. Needs no protective coating and looks and functions the same after months of outdoor use.
* No special care needed. Just rinse with water or wipe with a cloth — that is all.
* Appearance practically does not change over time. Colour, gloss and surface texture remain the same even after months of regular use.


## Parameters

| Parameter | Value |
|---|---|
| Shank length | 7 mm |
| Shank diameter | 3 mm |
| Head diameter | 7 mm |
| Quantity per Pack | 1000 |

## Pricing (USD)

| Quantity | Excl. VAT / packs | Incl. VAT (21 %) / packs | Price type |
|---|---|---|---|
| 1 packs | 90.562 USD | 109.580 USD | Basic |
| 10 packs | 51.750 USD | 62.618 USD | Package tier |
| 30 packs | 46.575 USD | 56.356 USD | Carton tier |



*Prices incl. VAT apply to EU end customers. EU VAT-registered businesses and export orders are priced excl. VAT — see cart or ?currency= for your case.*



## Compatible products (fits 7 mm)

* **Kemovan Round Punches ø 3 mm:** SKU KEM/LSHP30
* **Replacement punches ø 3 mm:** SKU 211700STP-6
* **Setting dies for our Double Cap Rivet ø 7 mm:** SKU 3997-66 Z
* **Rivet Setter ø 7 mm:** SKU RS/7x100
* **Setter with anvil for attaching saddlery rivets ø 7 mm:** SKU 8101-66 Z


## Available size variants (series SS 66 Z)

* 7 mm: SKU SS 66 Z (this product)
* 8 mm: SKU SS 63 Z
* 8 mm: SKU SS 70 Z 8mm
* 10 mm: SKU SS 70 Z
* 10 mm: SKU 72 Z - SS — Out of stock
* 12 mm: SKU 75 Z - SS



## Links

- Product page: https://www.pethardware.com/en/double-cap-rivets/double-cap-rivet-stainless-steel-1000-pcs-4534/
- Category: https://www.pethardware.com/en/double-cap-rivets/
- : http://blog.pethardware.com/en/saddlery-rivets-1st-part/