# Double Cap Rivet – Brass (10 pcs): 7 mm

- **Brand:** Pet Hardware®
- **SKU:** B66 Z
- **EAN:** 8595109511271
- **Category:** Rivets & Screws > Double Cap Rivets
- **Material:** Brass
- **Surface finish:** No finish
- **Size / inner width:** 7 mm
- **Weight:** 4 g
- **Minimum order:** 1 packs
- **In stock:** Yes


## Description and construction

Double cap saddlery rivet with bite (a very useful notch near the tip of the stem) that will speed up the riveting process, primarily for belts, collars and harnesses, and increase the strength of the join. Double cap rivets are used where both sides of the rivet will be visible, or where a rivet comes in contact with other surfaces (purse and other handles, leashes, collars, harnesses, …). The price listed is for the entire package (10 pcs)!

For proper riveting, it is essential to choose the right tool both for creating the hole and for setting the rivet itself. For making the hole, we recommend punches #KEM/LSHP30 or #211700STP-6. For riveting using the hand press #3990-00, use dies #3997-20 Z. For manual riveting, tools #8101-20 Z or #RS/6x100 are suitable. The size of the die or setting tool must always be selected according to the rivet size. You can also find suitable riveting tools among the recommended products below. The correct tool will be displayed based on the rivet size you select.

How to chose the correct-length rivet?

Whether we work with leather, webbing or fabric, the thickness of the material is always the deciding factor. For a the rivet to spread properly, choose one that is about 2–3 mm longer than the total thickness of the material. For rivet length see dimension "B" in the table.


## Limits and maintenance

* The finish does not increase corrosion resistance. Either the underlying material does not need it, or the finish is purely aesthetic.


## Parameters

| Parameter | Value |
|---|---|
| Shank length | 7 mm |
| Shank diameter | 3 mm |
| Head diameter | 7 mm |
| Quantity per Pack | 10 |

## Pricing (USD)

| Quantity | Excl. VAT / packs | Incl. VAT (21 %) / packs | Price type |
|---|---|---|---|
| 1 packs | 0.840 USD | 1.016 USD | Basic |
| 10 packs | 0.480 USD | 0.581 USD | Package tier |
| 100 packs | 0.432 USD | 0.523 USD | Carton tier |



*Prices incl. VAT apply to EU end customers. EU VAT-registered businesses and export orders are priced excl. VAT — see cart or ?currency= for your case.*



## Compatible products (fits 7 mm)

* **Kemovan Round Punches ø 3 mm:** SKU KEM/LSHP30
* **Replacement punches ø 3 mm:** SKU 211700STP-6
* **Setting dies for our Double Cap Rivet ø 7 mm:** SKU 3997-66 Z
* **Rivet Setter ø 7 mm:** SKU RS/7x100
* **Setter with anvil for attaching saddlery rivets ø 7 mm:** SKU 8101-66 Z


## Available size variants (series B66 Z)

* 7 mm: SKU B66 Z (this product)
* 8 mm: SKU B63 Z
* 10 mm: SKU B70 Z
* 13 mm: SKU B70 Z 13mm
* 11 mm: SKU B72 Z



## Frequently Asked Questions

### How do I choose the right rivet length?

The total thickness of the layers you're joining decides — add to it the shank overhang needed for spreading:


	
	Thinner materials — a shank 1–2 mm longer than the material thickness.
	
	
	Thicker materials — a shank 2–3 mm longer.
	


The shank length is listed for every rivet in the dimensions table as dimension B — the full range is in the Rivets & Screws category.

The hole diameter differs by material. For leather, choose a punch slightly smaller than the shank diameter — leather is elastic and grips the shank tightly. For waterproof webbing, choose a punch that matches the shank exactly; the webbing doesn't stretch, so the shank has to pass through without being forced.

A shank that's too long shows up as a rivet that deforms while spreading, or caps that don't line up.

Source: https://www.pethardware.com/en/faq/#delka-nytu


## Links

- Product page: https://www.pethardware.com/en/double-cap-rivets/double-cap-rivet-brass-10-pcs-4938/
- Category: https://www.pethardware.com/en/double-cap-rivets/
- : http://blog.pethardware.com/en/saddlery-rivets-1st-part/