# Double Cap Rivet – Stainless Steel (Aisi 304) (10 pcs): 7 mm

- **Brand:** Pet Hardware®
- **SKU:** 66 Z - SS
- **EAN:** 8595109519017
- **Category:** Rivets & Screws > Double Cap Rivets
- **Material:** Stainless steel (AISI 304)
- **Size / inner width:** 7 mm
- **Weight:** 3 g
- **Minimum order:** 1 packs
- **In stock:** No


## Description and construction

Double cap saddlery rivet with bite (a very useful notch near the tip of the stem) that will speed up the riveting process, primarily for belts, collars, and harnesses, and increase the strength of the join. Double cap rivets are used where both sides of the rivet will be visible, or where a rivet comes in contact with other surfaces (purse and other handles, leashes, collars, harnesses, …). The cap is made of stainless steel, the leg part is brass made with a nickel-plated finish. The price listed is for the entire package (10 pcs)!

To set using the #3990-00 hand press, use the #3997-66 Z die. For hand setting, the #8101-66 Z, #RS/7x100 setter is used. The size of piston or setter must be selected to match the size of the rivet. Or you can find the proper riveting tool among the products recommended below. The correct tool will be displayed for the rivet size that you choose.

How to chose the correct-length rivet?

Whether we work with leather, webbing or fabric, the thickness of the material is always the deciding factor. For a the rivet to spread properly, choose one that is about 2 mm longer than the total thickness of the material. For rivet length see dimension "B" in the table.


## Limits and maintenance

* Wet it, submerge it, leave it in water — fresh water will not harm it. No drying or treatment needed; water does not affect function or appearance.
* Withstands permanent contact with water, moisture and sweat without change. Needs no protective coating and looks and functions the same after months of outdoor use.
* No special care needed. Just rinse with water or wipe with a cloth — that is all.
* Appearance practically does not change over time. Colour, gloss and surface texture remain the same even after months of regular use.


## Parameters

| Parameter | Value |
|---|---|
| Shank length | 7 mm |
| Shank diameter | 3 mm |
| Head diameter | 7 mm |
| Quantity per Pack | 10 |

## Pricing (USD)

| Quantity | Excl. VAT / packs | Incl. VAT (21 %) / packs | Price type |
|---|---|---|---|
| 1 packs | 1.286 USD | 1.556 USD | Basic |
| 10 packs | 0.735 USD | 0.889 USD | Package tier |
| 100 packs | 0.662 USD | 0.801 USD | Carton tier |



*Prices incl. VAT apply to EU end customers. EU VAT-registered businesses and export orders are priced excl. VAT — see cart or ?currency= for your case.*



## Compatible products (fits 7 mm)

* **Setting dies for our Double Cap Rivet ø 7 mm:** SKU 3997-66 Z
* **Rivet Setter ø 7 mm:** SKU RS/7x100
* **Setter with anvil for attaching saddlery rivets ø 7 mm:** SKU 8101-66 Z



## Frequently Asked Questions

### How do I choose the right rivet length?

The total thickness of the layers you're joining decides — add to it the shank overhang needed for spreading:


	
	Thinner materials — a shank 1–2 mm longer than the material thickness.
	
	
	Thicker materials — a shank 2–3 mm longer.
	


The shank length is listed for every rivet in the dimensions table as dimension B — the full range is in the Rivets & Screws category.

The hole diameter differs by material. For leather, choose a punch slightly smaller than the shank diameter — leather is elastic and grips the shank tightly. For waterproof webbing, choose a punch that matches the shank exactly; the webbing doesn't stretch, so the shank has to pass through without being forced.

A shank that's too long shows up as a rivet that deforms while spreading, or caps that don't line up.

Source: https://www.pethardware.com/en/faq/#delka-nytu


## Links

- Product page: https://www.pethardware.com/en/double-cap-rivets/double-cap-rivet-3605/
- Category: https://www.pethardware.com/en/double-cap-rivets/
- : http://blog.pethardware.com/en/saddlery-rivets-1st-part/